4 Gang Light Module (L+N)

Product Description
  1. Reset Key
  2. Indicator Light
  3. Mounting Clip
Product Size
  • Without Mounting Clip 
    • W: 46 mm
    • H: 46 mm
    • D: 18 mm
  • With Mounting Clip
    • W: 50 mm
    • H: 46 mm
    • D: 22.5 mm
Technical Specification

Voltage

100-240V, 50/60Hz

Current

4x10A

Max Load

LED lamp: 4x250 W
Regular lamp:  4x2500 W 

Operation frequency

2.412GHz-2.484GHz Zigbee

Operation temp.

-10℃  + 40℃

Operation range

≤ 200m

Case temp.

Tc +80℃ (Max)

Dims (WxHxD)

46x46x18 mm (without clip)

Installation

Warnings:

  1. Installation must be carried out by a qualified electrician in accordance with local regulations.
  2. Keep the device out of reach of children.
  3. Keep the device away from water , damp or hot environments.
  4. Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
  5. Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
  6. Do NOT attempt to disassemble, repair or modify the device.
Manual Override

The switch module terminal reserves the access of manual override function for the end-user to switch on/off.

  • Switch on/off for permanent on/off function. 

    Notes: 
  1. Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory. 
  2. The App control is synchronized with the manual switch.
Wiring Instructions and Diagrams
  1. Turn off the power supply before carrying out any electrical installation work. 
  2. Connect wires according to the wiring diagram. 
  3. Insert the module into the junction box. 
  4. Turn on the power supply and follow switch module configuration instructions. 

   Note: Take your smartphone close to the switch module when you are configuring, and make sure you have min. 50% Wi-Fi signal.

  • Without normal switch
  • With 1 normal switch
  • With 2 normal switch
System Requirements

The PIERRE Wave system is a user-friendly solution for integrating and managing smart devices through a central platform. The system consists of the following components:

A - Required Elements:

  1. PIERRE Wave Products: These smart devices, including lighting, thermostats, sensors, and other appliances, connect wirelessly to the PIERRE Wave Gateway. They provide essential functions and capabilities for the system.
  2. PIERRE Wave Gateway: The central unit linking all PIERRE Wave devices, the gateway manages communication and data exchange, ensuring security and stability. It supports remote access and control, with the default Berlin display interface, though users can choose any PIERRE display model.

B - Optional Elements:

  1. Mobile PIERRE App: This app allows users to manage and monitor the system from their smartphone or tablet, offering real-time updates and remote access. It provides convenience but is not necessary for basic system operation.
  2. Router: An optional component that enables internet connectivity, allowing devices to be accessed and controlled remotely.
  1. System Operation: The gateway can connect to the router via Wi-Fi or LAN for internet connectivity, enhancing remote management capabilities. PIERRE Wave products communicate wirelessly with the gateway, which acts as the central hub. This bidirectional communication allows data to flow both ways, enabling users to send commands and receive status updates through the Mobile PIERRE App. The app facilitates effective management and real-time feedback on device statuses.
App-to-Device Pairing

Please scan the QR code to download PIERRE application

Log in with you Username and Password

Open Settings and press "Add Wave I/O"

Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing

  1. Reset Key
  2. Indicator Light
  3. PIERRE Wave Gateway 

Press "Find Devices"

PIERRE application will show the list of available devices. Press "Add found devices"

Enter Name, Role and Group settings and Save it

When the Light indicator stops flashing, the PIERRE Wave pairing process is finished

FAQ

Q1: What should I do if I can’t configure the switch module?

  1. Please check whether the device is powered on.
  2. Make sure the PIERRE Wave Gateway is available. 
  3. Make sure the wiring is correct.

Q2: What device can be connected to this PIERRE switch module?

It can be connected to devices such as ceiling lamps, panel light, etc.

Q3: What happens if the WIFI goes off?

You can still control the device connected to the switch module with your traditional switch and with PIERRE displays.

Q4: How do I reset the device? 

  1. Switch on/off the traditional switch for 5 times until the indicator light flashes. 
  2. Press the reset key for about 5 seconds until the indicator light flashes.