PIERRE Pro - EV Charger Column 2x22kW Three Phase (6-32A) - PREORDER
| SKU | PP-EV2C32A-CLM |
|---|---|
| Product line | PIERRE Pro |
| Category | EV Chargers |
| Manufacturer | Suntree |
| Manufacturer SKU | SCJ6E-22/2 |
| GTIN / EAN | 8606034721830 |
Overview
The EV Charger column 2x32A is a floor-mounted pedestal, 400 V three-phase EV charger with per channel adjustable output current from 6 A to 32 A and a maximum rated power of 2x 22 kW. It supports various user authentication modes, including RFID, plug-and-charge, and SMART PIERRE application. Ethernet connection and OCPP 1.6 compliance allows backend integration for remote access, billing, and control.
Electrical protection includes overcurrent, undervoltage, surge, ground fault, short circuit, overtemperature, and leakage current detection. The charger is housed in an IP65-rated enclosure for outdoor or indoor use, and operates reliably between –30 °C and +50 °C with up to 95% relative humidity. Two Type 2 connector cables are attached in 5 m length, making the unit suitable for private, fleet, or semi-public charging infrastructure.
Key features
Adjustable per channel output current (6–32 A); 2x 22 kW max output power; three-phase 400 V AC input; OCPP 1.6 protocol support; user access via RFID, plug-and-charge, SMART PIERRE application; integrated protections: over/undervoltage, overcurrent, ground fault, short circuit, overtemperature, leakage detection; IP65-rated enclosure for outdoor use; supports GB/T and Type 2 connectors with fixed cable.
Technical specifications
| Certification | |
|---|---|
| CE Marking | Yes |
| Warranty | 2 years |
| Connectivity | |
| Communication Frequency | 2.4GHz |
| Connectivity | 2.4GHz Wi-Fi (802.11 b/g/n) |
| Electrical | |
| Input Voltage | AC 380-415V V |
| Current | 32 A |
| Frequency | 50-60Hz |
| Environmental | |
| Operating Temperature | -13°F - +122°F |
| Operating Temperature (°C) | -25 - +50 |
| Operating Humidity | 3 - 95 % RH |
| Altitude | <2000 m |
| IP Rating | IP54 |
| Features | |
| LED Indicators | Yes |
| Physical | |
| Width | 260 mm |
| Height | 1145 mm |
| Depth | 260 mm |
| Panel Material | ABS+PC material |
| Product Color | Black |
| Control | |
| Access Modes | Smartphone, Card (EM & Mifare) |
| Safety | |
| Safety Features | Overload protection, Over voltage protection, Thermal protection |
Electrical & I/O
| Operating voltage | 400 V |
|---|---|
| Power consumption | 44000 W |
Physical & packaging
| Dimensions (L × W × H) | 260 × 260 × 1145 mm |
|---|
User manual
- 1. Product Description
- 2. Package contents
- 3. Installation
- 4. What you need
- 5. WARNING – HIGH TEMPERATURE
1. Product Description
Dual three-phase AC EV charger column with 2 × 22 kW nominal output, adjustable current per outlet (6–32 A), OCPP 1.6 compatibility, and multi-level protection features. Designed for fixed installation in residential and commercial settings, with IP65-rated enclosure and RFID card and app access.
The EV Charger is monitored and controlled from the Smart PIERRE app. The charger communicates with the PIERRE cloud over OCPP 1.6 (Open Charge Point Protocol), which provides remote management, status monitoring and charging session control.
The integration enables features such as:
- Remote start and stop of charging sessions.
- Real-time charger status monitoring.
- Charging session history and energy consumption statistics.
- User authentication and access management.
- Automation with other PIERRE devices and building functions.
Charging Modes
The EV Charger supports two operating modes.
Plug & Play Mode
In Plug & Play mode, charging starts automatically as soon as the vehicle is connected to the charger. No user authentication is required. Use this mode only where access to the charger is physically restricted to authorized users.
Authorization Mode
In Authorization mode, users must authenticate before a charging session can begin. Authentication is performed with an RFID card, so only authorized users can start a session. This mode is recommended for apartment buildings, workplaces, hotels, public parking areas, and other shared charging locations where access control and user identification are required.
Electrical Installation Requirements
An EV charger is a high-power electrical device and must be installed according to local electrical regulations by a qualified electrician.
Before installation, the following requirements must be verified:
- The EV charger must be connected to a dedicated electrical circuit protected by its own circuit breaker.
- The protective devices (circuit breaker and residual current protection, where required) must be selected according to the charger's rated power and local electrical standards.
- The electrical wiring must have the appropriate cable cross-section for the expected charging current.
- The installer must verify that the building's electrical installation and the available power capacity are sufficient to support the charger without overloading the electrical network.
- If multiple EV chargers or other high-power consumers are installed, load balancing or power management should be considered.
Safety Notice
Improper installation may result in overheating, equipment damage, or electrical hazards. Always ensure that the electrical installation complies with local regulations and that the available electrical capacity is suitable for the selected charger and charging current. Installation and commissioning should only be performed by qualified personnel.
2. Package contents
The package includes a CR1220 battery. During installation, please insert the battery into the device.
Without the battery, the device cannot retain the correct date and time. This may cause problems when using scheduled charging or charging sessions with the charger.
3. Installation
The package includes a CR1220 battery. During installation, please insert the battery into the device.
Without the battery, the device cannot retain the correct date and time. This may cause problems when using scheduled charging or charging sessions with the charger.
4. What you need
Wired and cloud connected. Needs an internet connection for OCPP communication with the PIERRE cloud; no PIERRE Controller is required. Controlled through the Smart PIERRE app.