1 Gang Dimmer Module (no Neutral)
| SKU | PW-MOD-D-1G-L |
|---|---|
| Product line | PIERRE Wave |
| Category | Pierre Wave - Modules / Light control |
| Manufacturer | QualityLed |
| Manufacturer SKU | QS-Zigbee-D02-TRIACL |
| GTIN / EAN | 8606034720222 |
| HS code | 8533409000 |
Overview
The PIERRE Wave 1 Gang Dimmer Module operates on a 220-240V AC 50/60Hz power supply and supports up to 150W of dimmable load. It communicates using the PIERRE Wave protocol, ensuring a reliable and responsive connection with a compatible gateway hub. This module’s design eliminates the need for a neutral wire, offering flexibility in installation while maintaining stable operation through a low-voltage TRIAC-based dimming circuit.
The PIERRE Wave 1 Gang Dimmer Module offers intelligent control through the PIERRE Smart home system and can be combined with compatible gateways to create a robust home automation network. Even in cases of network instability or disconnection, local control ensures continued operation, maintaining lighting control within the local area network.
Key features
AC 220-240V 50/60Hz, Max. load: 150W for LED, no Neutral, remote control, 1 gang, Dimming Type: Trailing Edge
Technical specifications
| Electrical | |
|---|---|
| Power Supply | 220-240 AC 50/60Hz |
| Frequency | 2.4 - 2.484 GHz |
| Max Load | Max 150W (LED) |
| Connectivity | |
| Connectivity | Zigbee |
| Physical | |
| Product Color | White |
| Panel Material | PC material |
| Wiring Requirements | L - Line |
| Features | |
| LED Indicators | Yes |
| Operation Range | 200 m |
| Environmental | |
| Operating Temperature (°C) | -10 - +40 |
| Operating Temperature | +14°F - +104°F |
| IP Rating | IP20 |
| Safety | |
| Safety Features | Overload protection, Over voltage protection, Short circuit protection, Thermal protection, Electrostatic protection, Surge protection |
| Control | |
| Number of Channels | 1 channel |
Physical & packaging
| Dimensions (L × W × H) | 46 × 19 × 46 mm |
|---|---|
| Weight | 32 g |
| Box dimensions (L × W × H) | 59 × 29 × 50 mm |
| Box weight | 44 g |
User manual
- 1. Product Description
- 2. Product Size
- 3. System Requirements
- 4. Installation
- 5. Manual Override
- 6. Wiring Instructions and Diagrams
- 7. App-to-Device Pairing
- 8. FAQ
1. Product Description
- Reset Key
- Indicator Light
- Mounting Clip
2. Product Size
- Without Mounting Clip
- W: 46 mm
- H: 46 mm
- D: 18 mm
- With Mounting Clip
- W: 50 mm
- H: 46 mm
- D: 22.5 mm
3. System Requirements
The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.
Required
- PIERRE Wave products: switches, modules, sensors, thermostats and other devices. They connect wirelessly to the gateway.
- Gateway: a PIERRE display and/or gateway. It links all PIERRE Wave devices and handles the communication with the app.
Optional
- Smart PIERRE app: control and monitoring from a smartphone or tablet. Not required for basic operation.
- Router: gives the gateway internet access for remote control.
Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.
4. Installation
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
5. Manual Override
The switch Dimmer terminal reserves the access of manual override function for the end-user to switch on/off, or adjust the light level by push-switch.
- Short Push (<1s): permanent on/off function.
- Long Push (>1s): adjust the brightness level.
Notes:
- Both the adjustment on App and the push switch can overwrite each other, the last adjustment remains in memory.
- App control is synchronized with the manual switch.
- The “S” terminals may be left unconnected if no manual control is required.
6. Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow dimmer module configuration instructions.
With One Switch
With Two Switches
Without Switch
7. App-to-Device Pairing
Please scan the QR code to download PIERRE application
Log in with your Username and Password
Open Settings and press "Add Wave I/O"
Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing
- Indicator Light
- Reset Key
- PIERRE Wave Gateway
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
8. FAQ
Q1: What should I do if I cannot configure the dimmer module?
- Check that the module is powered.
- Make sure the PIERRE Wave gateway (PIERRE display and/or gateway) is online.
- Check the wiring against the diagram.
Q2: What loads can be connected to this dimmer module?
TRIAC-dimmable LED lamps, incandescent and halogen lamps, within the rated load given in the specifications.
Q3: What happens if the Wi-Fi or internet goes down?
The module keeps working locally. You can still switch and dim the light with the push-button and control it from the PIERRE display and/or gateway; only remote access from the app is unavailable.
Q4: How do I reset the module?
Press and hold the reset key for about 10 seconds, or toggle the connected push-button 10 times and wait about 10 seconds, until the indicator light flashes quickly.