4 Gang Light Module (L+N)
| SKU | PW-MOD-L-4G-NL |
|---|---|
| Product line | PIERRE Wave |
| Category | Pierre Wave - Modules / Light control |
| Manufacturer | QualityLed |
| Manufacturer SKU | QS-Zigbee-S09-4C |
| GTIN / EAN | 8606034720307 |
| HS code | 8537109100 |
Overview
The PIERRE Wave 4 Gang Light Module (L+N) puts four independently switched channels behind an existing switch plate, so lighting already wired in the room can be brought under PIERRE control without running new cable back to the board.
It runs from 100-240 V AC 50/60 Hz and requires both Live and Neutral. Each channel handles up to 250 W of LED lighting or 2500 W of incandescent — size against the LED figure on a modern installation. Total current is 10 A.
It communicates over PIERRE Wave (Zigbee 3.0, 2.4 GHz), and being mains powered it also routes for battery devices nearby.
The housing is PC, rated IP20, operating from -10 °C to +40 °C at up to 80 % RH. Protection covers overload, over-voltage, short circuit, thermal, static and surge.
Key features
- Four independently switched lighting channels
- 250 W LED or 2500 W incandescent per channel
- 100-240 V AC 50/60 Hz, Live and Neutral required
- Rated 10 A
- PIERRE Wave (Zigbee 3.0, 2.4 GHz)
- Overload, over-voltage, short-circuit, thermal, static and surge protection
Technical specifications
| Electrical | |
|---|---|
| Power Supply | 100-240V AC 50-60Hz |
| Max Load | LED: 4x250 W, Regular: 4x2500 W |
| Current | 10.0 A |
| Frequency | 2.4 GHz-2.484GHz |
| Connectivity | |
| Connectivity | Zigbee |
| Physical | |
| Panel Material | PC material |
| Product Color | White |
| Wiring Requirements | N - Neutral, L - Line |
| Features | |
| LED Indicators | Yes |
| Operation Range | 200 m |
| Environmental | |
| Operating Temperature (°C) | -10 + 40 |
| Operating Temperature | +14°F - +104°F |
| Operating Humidity | ≤ 80 % RH |
| IP Rating | IP20 |
| Safety | |
| Safety Features | Overload, Over Voltage, Short Circuit, Thermal Protection, Static Protection, Surge Protection |
| Control | |
| Number of Channels | 4 channels |
Physical & packaging
| Dimensions (L × W × H) | 46 × 19 × 46 mm |
|---|---|
| Weight | 48 g |
| Box dimensions (L × W × H) | 59 × 29 × 50 mm |
| Box weight | 56 g |
User manual
- 1. Product Description
- 2. Product Size
- 3. System requirements
- 4. Installation
- 5. Manual Override
- 6. Wiring Instructions and Diagrams
- 7. App-to-Device Pairing
- 8. FAQ
1. Product Description
- Reset Key
- Indicator Light
- Mounting Clip
2. Product Size
- Without Mounting Clip
- W: 46 mm
- H: 46 mm
- D: 18 mm
- With Mounting Clip
- W: 50 mm
- H: 46 mm
- D: 22.5 mm
3. System requirements
The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.
Required
- PIERRE Wave products: switches, modules, sensors, thermostats and other devices. They connect wirelessly to the gateway.
- Gateway: a PIERRE display and/or gateway. It links all PIERRE Wave devices and handles the communication with the app.
Optional
- Smart PIERRE app: control and monitoring from a smartphone or tablet. Not required for basic operation.
- Router: gives the gateway internet access for remote control.
Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.
What you need
A PIERRE Wave (Zigbee 3.0, 2.4 GHz) gateway: a PIERRE display and/or gateway.
4. Installation
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
5. Manual Override
The switch module terminal reserves the access of manual override function for the end-user to switch on/off.
- Switch on/off for permanent on/off function.
Notes:
- Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory.
- The App control is synchronized with the manual switch.
6. Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow switch module configuration instructions.
Note: During pairing keep the module within range of the PIERRE Wave gateway.
With 1 normal switch
With 2 normal switches
Without normal switch
| Run | Wires | Cross-section | Cable type | Conductors |
|---|---|---|---|---|
| From electric box to light module | 2 | 1.5 mm² | NYM-O | L, N |
| From light module to light fittings | 5 | 1.5 mm² | NYM-J | L1, L2, L3, L4, N |
| From light module to switches | 5 | 0.75 mm² | NYM-J | COM, S1, S2, S3, S4 |
Three runs. The supply into the module is two conductors at 1.5 mm², line and neutral. Out to the fittings: 4 switched lines (L1–L4) plus the neutral at 1.5 mm², one switched line per fitting. The wall switches are looped on 0.75 mm²: common and S1–S4, one input per gang. Because the neutral is present at the module, this variant also works as a Zigbee repeater.
7. App-to-Device Pairing
Please scan the QR code to download PIERRE application
Log in with your Username and Password
Open Settings and press "Add Wave I/O"
Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing
- Reset Key
- Indicator Light
- PIERRE Wave Gateway
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
8. FAQ
Q1: What should I do if I cannot configure the light module?
- Check that the module is powered.
- Make sure the PIERRE Wave gateway (PIERRE display and/or gateway) is online.
- Check the wiring against the diagram.
Q2: What loads can be connected to this module?
Lighting loads such as ceiling lamps and panel lights, within the rated load given in the specifications.
Q3: What happens if the Wi-Fi or internet goes down?
The module keeps working locally. You can still switch the light with the wall switch and control it from the PIERRE display and/or gateway; only remote access from the app is unavailable.
Q4: How do I reset the module?
Either toggle the connected wall switch 5 times, or press and hold the reset key for about 10 seconds, until the indicator light flashes.
Q5: What happens during a power cut?
The module keeps its last state and comes back when power is restored.
Q6: What size wall box does the module need?
See the Product Size section. The module fits behind the switch in a standard wall box; a deep box makes wiring easier.
Q7: What is the difference between the neutral and no-neutral modules?
Modules with a neutral also act as Zigbee repeaters and strengthen the network. Use the no-neutral module where no neutral is available at the switch.
Q8: Can any switch or button be used?
Yes. Any standard wall switch or push-button can be connected to the S inputs.
Q9: Does it support multi-way switching?
Yes. See the diagrams in the Wiring Instructions and Diagrams section.