Heating & Cooling
Solution - Gas Boiler
A compatible gas boiler can be controlled by the PIERRE system through its external heat-demand input . The PIERRE system can provide the room temperature measurement and…
Solution - Heating and Cooling with 0-10V
Heating and cooling units that offer only an analogue control input are driven from the PIERRE Pro Controller with a 0–10 V signal. The voltage on the line sets the output level…
Solution - Heat Recovery Unit (Recuperator)
A recuperator , or heat recovery ventilation unit, transfers part of the heat energy from the outgoing air to the incoming fresh air, providing ventilation while reducing heat…
Solution - Hot Tub with Massage Jets
A hot tub or hydrotherapy pool is controlled from the PIERRE system through standard outputs and inputs: relays for pumps and valves, switched or dimmed outputs for lighting, and…
Solution - HVAC with Blower Speed
HVAC with Blower Speed Control HVAC with blower speed control covers heating, ventilation and air conditioning units where the fan operates at several fixed speeds. The PIERRE…
Solution - Modbus Integration
Any device with a Modbus interface connects directly to the PIERRE Pro Controller: heating and cooling units, recuperators, sensors, meters and lights. The controller reads and…
Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)
On/Off Heating and Cooling control uses a switching output of the PIERRE Controller together with a temperature sensor to control heating or cooling demand. The operation is…
Solution - Pools
Pool equipment is controlled from the PIERRE system through the same outputs and inputs used elsewhere: relays for pumps and valves, dimmable or switched outputs for lighting, and…
Solution - Sauna
The PIERRE system enables the control and monitoring of compatible sauna systems. The sauna can be turned on and off, the desired temperature can be set, and the current cabin…
Solutions - Fan Coil control
The PIERRE system supports fan coil unit (FCU) control through several interface methods, depending on the requirements of the HVAC equipment. 1. Relay-Based Control Fan coil…
Solution - Valve Control
Valve Types Supported by PIERRE On/Off Valves The most common valve type used in smart home installations. These valves operate in a simple open or closed state and are typically…
Solution - Water Heater
Water heaters can be integrated into the PIERRE system using a relay output, enabling automated and remote control of the device. This allows users to manage water heating…