Sensors
Solution - CO and other Gas Sensors
Compatible wired gas and CO detectors can be connected to the PIERRE PRO system. The detector is connected to the appropriate input of the PIERRE Controller , allowing its alarm…
Solution - Contact Sensor
A contact sensor reports whether an opening is open or closed — a door, window, gate, garage door or any other monitored opening. The system supports PIERRE contact sensors and…
Solution - Humidity and Temperature Sensors
The combined humidity and temperature sensor measures both the temperature and relative humidity of a room with a single device. The measured values are transmitted to the PIERRE…
Solution - Leak Sensor
A leak sensor detects water or excessive moisture at a specific point and reports it to the controller, which can raise a notification and trigger a scenario. Connection The…
Solution - Smoke and Fire Sensors
Connection Follow the wiring guidelines of the specific smoke sensor. The sensor is connected to the controller I/O terminals via its own relay contact, so the detection signal…