Smart Control Panel - Berlin 10"
| SKU | P-DSP-BER |
|---|---|
| Product line | PIERRE Pro, PIERRE Wave |
| Category | Displays |
| Manufacturer | Smatek |
| Manufacturer SKU | Model: S9-NZE |
| GTIN / EAN | 8606034720055 |
| HS code | 8537109100 |
Overview
The Smart Home Control Panel Berlin 10" replaces a conventional switch plate and runs the room from one screen. It is built on an RK3566 quad-core Cortex-A55 with 2 GB RAM and 16 GB storage, behind a 10.1-inch touch screen at 1920x1200 in a metal panel.
The two built-in relays provide an option for direct ON/OFF control. Two relay circuits rated 200 W each are built in, so the panel can switch the room's own lighting rather than only issuing commands to other devices.
The integrated temperature, humidity and brightness sensors add another layer of possibilities for advanced automation. By using the display's built-in outputs users can create customized sensor-based automations.
Four programmable buttons sit alongside the screen and can be configured to control selected I/Os from the system's I/O list.
For installation: the Berlin takes an 86x86x50 mm back box with 60 mm fixing centres and draws 10 W. That 50 mm depth is not optional — specify the Room Control - Recessed Wall Mounting Box for the wall construction on site. It is rated IP20 and runs from 0 °C to +40 °C at 5–90% RH non-condensing.
Key features
- 10.1-inch touch screen
- RK3566 quad-core Cortex-A55, 2 GB RAM, 16 GB ROM
- Ethernet and Wi-Fi
- Gateway for PIERRE Wave (Zigbee 3.0)
- Two built-in relay circuits, 200 W each
- Four programmable buttons
Technical specifications
| Certification | |
|---|---|
| Warranty | 2 years |
| Control | |
| Relay Type | 2-way relay 200W per circuit None |
| Display | |
| Touch Screen Dimension | 10.1 inch |
| Touch Screen Resolution | 1920x1200px pixels |
| Electrical | |
| Input Power | 230V AC 50-60Hz 0.3A |
| Power Consumption | 10.0 W |
| Current | 10.0 A |
| Max Load | 10A |
| Environmental | |
| Operating Temperature | +32 - +104 |
| Operating Temperature (°C) | 0 - +40 |
| Operating Humidity | 5 - 90 , Non-condensing % RH |
| IP Rating | IP20 |
| Features | |
| LED Indicators | Yes |
| Hardware | |
| CPU | RK3566 Quad core Cortex-A55 |
| Operating System | Android |
| OS Version | 11 |
| Memory (RAM) | 2 GB |
| Memory (ROM) | 16 GB |
| Physical | |
| Panel Material | ABS+PC material |
| Product Color | Grey |
| Mounting Type | Wall mount |
| Mounting Box | 86x86x50mm |
| Bolt Hole Distance | 60 mm |
| Wiring Requirements | N - Neutral, L - Live |
| Connectivity | |
| Connectivity | 10M/100M Ethernet RJ45, 2.4GHz Wi-Fi (802.11 b/g/n), Zigbee |
| Sensors | |
| Built-in Sensors | Temperature, Humidity, Brightness |
Pin layout
| Pin | Label | Type | Position |
|---|---|---|---|
| 1 | L | power_line | bottom |
| 2 | N | power_neutral | bottom |
| 3 | ETH | ethernet_in | top |
| 4 | L1 | control_L_out | top |
| 5 | L2 | control_L_out | top |
Physical & packaging
| Dimensions (L × W × H) | 273 × 12 × 156 mm |
|---|---|
| Weight | 957 g |
| Box dimensions (L × W × H) | 330 × 66 × 207 mm |
| Box weight | 1200.166 g |
User manual
- 1. Dimensions
- 2. Interface and Ports
- 3. Product specifications
- 4. Installation instructions
- 5. Wiring instructions
- 6. Add Display
- 7. Video
- 8. FAQ
1. Dimensions
- W: 27.3 cm
- H: 15.6 cm
- D: 1.2 cm
2. Interface and Ports
- 4 × microphones
- Light sensor
- Camera
- Scene switch
- Built-in ladar sensor
- Standard model
- Temperature and humidity sensor
- 2 W speaker
- USB Type-C port
3. Product specifications
4. Installation instructions
Separate the base from panel
Fasten the base to the wall box with the mounting screws (M4 × 25 or M4 × 45).
- 86 × 86 mm standard wall box
Fix the display back onto the base with the mounting screws (M2 × 4).
Note: Do not overtighten the screws; this can deform or damage the screen or hardware.
If the display is not flat after installation, do not press on the screen. Check the wall box and base installation first.
- Wall
- Wall box
5. Wiring instructions
- Output live wire 1 – max 200 W
- Output live wire 2 – max 200 W
- Ethernet RJ45 port
PIERRE Berlin 10" display – wiring diagram
| Run | Wires | Cross-section | Cable type | Conductors |
|---|---|---|---|---|
| From PIERRE Display to Electric box (Required) | 2 | 1.5 mm² | NYM-O | L, N |
| From PIERRE Display to Consumer (Optional) | 3 | 1.5 mm² | NYM-O | L1, L2, N |
| From PIERRE Display to Network Switch (Recommended) | 1 | - | Cat 5e U/UTP | - |
6. Add Display
Follow the steps below to add the Helsinki display.
- Open Displays
- Open the Menu and, under Settings, tap Displays.
- QR code
- Scan the QR code shown on the display with your smartphone to add the Berlin display, then follow the steps on the screen.
- Invite New Display
- Scanning the QR code invites the new Helsinki display to the system.
- Tap Done to confirm.
7. Video
PIERRE Academy videos for the Berlin display:
8. FAQ
Q1: Can the display’s sound be adjusted?
Yes. Swipe down from the top of the display to open the menu, where you find the sound settings.
Q2: Do displays need to be connected to a controller?
No. Displays connect to the system through the network, wired or wireless, and do not need a direct connection to the Controller.
Q3: Can the display size be upgraded?
Yes. A smaller display can be replaced with a larger one.
Q4: Are the displays waterproof?
No. The displays are not waterproof and are not suitable for areas exposed to moisture or rain.
Q5: Is a thermostat required?
No. A temperature sensor integrated in the PIERRE system can monitor the room temperature and control the heating/cooling devices.
Q6: Does PIERRE have its own thermostat?
Yes. PIERRE offers its own smart thermostats; see the thermostat product category.
Q7: Can the Berlin display work as a thermostat?
Yes. The Helsinki display has a built-in temperature and humidity sensor and two relays, so it can control heating/cooling devices like a thermostat.
Q8: If I remove an old thermostat, can I replace it with a PIERRE display for heating control?
Yes. The Helsinki display has a built-in temperature sensor and can replace an old thermostat.
Q9: Can the display relay control underfloor heating valves?
Yes. The display relays can control underfloor heating valves as well as other heating and cooling devices.
Q10: How accurate is the temperature sensor?
PIERRE temperature sensors are available in wired and wireless versions; see the product specifications for the accuracy of each sensor.
Q11: How many temperature sensors do I need?
At least one sensor for basic heating/cooling control. Install a sensor in every heating/cooling zone or room where you want individual temperature control.
Q12: What is required for connecting displays?
A mains supply (2 × 1.5 mm², L and N) and a network connection through a UTP (Cat 5e) cable.
Q13: How can heat quantity measurement be solved with the PIERRE system?
With a PIERRE Pro Controller and an M-Bus to Modbus converter. The heat meters are connected to the M-Bus side of the converter.
Q14: Can I adjust different temperatures in different rooms?
Yes. The temperature can be controlled room by room.
Q15: Is it necessary to calibrate the temperature sensor?
Not always, but it is often useful.
Not necessary if: the sensor is factory-calibrated (±0.5 °C or better); the application does not need high precision (comfort heating/cooling in a home); the installation location is good (away from direct sun, drafts and heat sources).
Useful if: the displayed temperature does not match a reliable reference thermometer; the device is installed where it is affected by heat from electronics, sunlight or poor airflow; the system needs precise control (HVAC, energy optimisation).
In the Smart PIERRE app, calibration is optional. You can add or subtract an offset to fine-tune the reading.