RGB Controller
PP-RGB
Pro
| SKU | PP-RGB |
|---|---|
| Product line | PIERRE Pro |
| Category | Lights / LED Strip control |
| Manufacturer | JLCPCB |
| GTIN / EAN | 8606034720345 |
| HS code | 8537109100 |
Overview
The PIERRE Pro RGB Controller drives RGB LED strip from the PIERRE system. It uses the WS2811 one-wire protocol, so colour data travels to the strip on a single DIN line alongside the supply driving three colour channels.
It runs from 12 V DC. The connection from the PIERRE controller should be made in shielded SFTP cable — a one-wire data line is timing-sensitive and picks up interference over a long run, which shows as colour flicker.
Where the run is long or the strip is bright, add an RGB amplifier to restore signal and supply along the length.
The housing is metal. Protection covers over-voltage, short circuit and thermal.
Key features
- Drives addressable RGB LED strip, WS2811 one-wire protocol
- Three channels
- 12 V DC supply
- Shielded SFTP cable to the controller
- Pairs with an RGB amplifier for long runs
- Over-voltage, short-circuit and thermal protection
Technical specifications
| Electrical | |
|---|---|
| Power Supply | DC 12V |
| Physical | |
| Panel Material | Metal |
| Control | |
| Number of Channels | 3 channels |
| Safety | |
| Safety Features | Over voltage protection, Short circuit protection, Thermal protection |
Pin layout
| Pin | Label | Type | Position |
|---|---|---|---|
| 1 | 12V+ | power_12V_input | top |
| 2 | Signal | bus_tx | top |
| 3 | GND | power_gnd_in | top |
| 4 | V+ | output_12v_plus | bottom |
| 5 | R | output_12v_plus | bottom |
| 6 | G | output_12v_plus | bottom |
| 7 | B | output_12v_plus | bottom |
Physical & packaging
| Dimensions (L × W × H) | 19 × 10 × 41 mm |
|---|---|
| Weight | 5 g |
| Box dimensions (L × W × H) | 19 × 10 × 41 mm |
| Box weight | 5 g |