Gate Opener Module
| SKU | PW-MOD-GO |
|---|---|
| Product line | PIERRE Wave |
| Category | Pierre Wave - Modules / Gate openers |
| Manufacturer | QualityLed |
| Manufacturer SKU | QS-Zigbee-C03 |
| GTIN / EAN | 8606034720321 |
| HS code | 8537109100 |
Overview
The PIERRE Wave Gate Opener Module operates on a 100-240V AC 50/60Hz power supply and is engineered to provide reliable control for gate and garage door systems. Utilizing the PIERRE Wave protocol, it seamlessly integrates with compatible smart home gateways, allowing users to manage their gate or garage doors remotely via the PIERRE Smart home system. This module is designed to work with motorized gates and garage doors, providing both secure access and automated operation.
The module offers voltage-free control, making it compatible with a wide range of gate and door mechanisms. Built-in short circuit protection features enhance the safety and durability of the system. Users can create custom schedules, automation rules, or integrate voice control commands to streamline entry and exit scenarios.
Key features
100-240V 50/60Hz, voltage-free control, compatible with motorized gates and garage doors, remote operation, overload and thermal protection
Technical specifications
| Electrical | |
|---|---|
| Power Supply | 100-240V AC 50-60Hz |
| Connectivity | |
| Connectivity | Zigbee |
| Communication Frequency | 2.4GHz - 2.484GHz |
| Physical | |
| Panel Material | ABS+PC material |
| Product Color | White |
| Wiring Requirements | N - Neutral, L - Line |
| Features | |
| LED Indicators | Yes |
| Operation Range | 200 m |
| Environmental | |
| Operating Temperature (°C) | -10 - +40 |
| Operating Temperature | +14°F - +104°F |
| Operating Humidity | ≤ 80 % RH |
| IP Rating | IP20 |
| Safety | |
| Safety Features | Overload protection, Over voltage protection, Short circuit protection, Thermal protection, Electrostatic protection, Surge protection |
| Control | |
| Number of Channels | 1 channel |
Physical & packaging
| Dimensions (L × W × H) | 46 × 19 × 46 mm |
|---|---|
| Weight | 33 g |
| Box dimensions (L × W × H) | 59 × 29 × 50 mm |
| Box weight | 52 g |
User manual
- 1. Product Description
- 2. Product Size
- 3. System requirements
- 4. Product specifications
- 5. Installation
- 6. Wiring Instructions and Diagrams
- 7. Manual Override
- 8. App-to-Device Pairing
- 9. FAQ
1. Product Description
- Reset Key
- Indicator Light
- Mounting Clip
2. Product Size
- Without Mounting Clip
- W: 46 mm
- H: 46 mm
- D: 18 mm
- With Mounting Clip
- W: 50 mm
- H: 46 mm
- D: 22.5 mm
3. System requirements
The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.
Required
- PIERRE Wave products: switches, modules, sensors, thermostats and other devices. They connect wirelessly to the gateway.
- Gateway: a PIERRE display and/or gateway. It links all PIERRE Wave devices and handles the communication with the app.
Optional
- Smart PIERRE app: control and monitoring from a smartphone or tablet. Not required for basic operation.
- Router: gives the gateway internet access for remote control.
Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.
What you need
A PIERRE Wave (Zigbee 3.0, 2.4 GHz) gateway: a PIERRE display and/or gateway.
4. Product specifications
5. Installation
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
6. Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow the gate opener module configuration instructions.
Note: During pairing keep the module within range of the PIERRE Wave gateway.
The diagram shows the typical wiring of the PIERRE Gate Opener Module. Numbered components:
- Input AC power (L + N): the module is powered from 100–240 V AC. Connect line (L) and neutral (N) as shown; this supplies the control electronics and the relay.
- Input – contact sensor (S1, S2): connect a magnetic contact sensor fitted to the gate or garage door. It reports whether the gate is open or closed.
- Fixed sensor part (wall-mounted): the part of the magnetic contact fixed to the wall or frame. It stays in place and aligns with the moving part when the gate is closed.
- Moving sensor part (gate-mounted): the magnet mounted on the gate or door. It moves with the gate and closes the contact when it meets the fixed part (3).
- Door control terminals L1 and L2: a dry-contact relay output that gives a short pulse to the motor's trigger input, like a press of the wall push-button. Connect it to the gate motor's push-button (start) terminals.
- Gate motor unit: receives the pulse from L1/L2 and opens or closes the gate.
- Manual wall push-button: a push-button wired in parallel with L1 and L2. Pressing it triggers the motor in the same way as the module.
| Run | Wires | Cross-section | Cable type | Conductors |
|---|---|---|---|---|
| From electric box to gate opener module | 2 | 1.5 mm² | NYM-O | L, N (230 V AC) |
| From gate opener module to gate motor (trigger input) | 2 | 0.75 mm² | H07V-K | Relay output L1, L2 |
| From gate opener module to push-button | 2 | 0.75 mm² | H07V-K | L1, L2 (in parallel with the motor trigger) |
| From gate opener module to contact sensor | 2 | 0.75 mm² | H07V-K | Sensor input S1, S2 |
Four runs, two conductors each. The 230 V supply arrives on 1.5 mm² NYM-O. The three signal runs are single-core flexible: 0.75 mm² to the gate motor's trigger input, 0.75 mm² to the push-button, and 0.75 mm² to the contact sensor that reports whether the gate is open or closed. Only the supply run carries mains; the other three are low-voltage signalling.
7. Manual Override
A wall push-button wired in parallel with the L1 and L2 output terminals triggers the gate motor directly, so the gate can be opened or closed without the app.
Notes:
- The module output is a momentary dry contact; it does not hold the gate open or closed.
- The contact sensor on S1 and S2 reports the open/closed state to the app whichever way the gate was triggered.
8. App-to-Device Pairing
Please scan the QR code to download PIERRE application
Log in with your Username and Password
Open Settings and press "Add Wave I/O"
Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing
- Indicator Light
- Reset Key
- PIERRE Wave Gateway
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
9. FAQ
Q1: What should I do if I cannot configure the gate opener module?
- Check that the module is powered.
- Make sure the PIERRE Wave gateway (PIERRE display and/or gateway) is online.
- Check the wiring against the diagram.
Q2: What can be connected to this module?
Gate and garage door motors with a push-button (dry contact) trigger input, plus a magnetic contact sensor for open/closed feedback.
Q3: What happens if the Wi-Fi or internet goes down?
The gate can still be operated with the wall push-button and from the PIERRE display and/or gateway; only remote access from the app is unavailable.
Q4: How do I reset the module?
Press and hold the reset key for about 10 seconds until the indicator light flashes quickly.