2 Gang Light Module (no Neutral)
| SKU | PW-MOD-L-2G-L |
|---|---|
| Product line | PIERRE Wave |
| Category | Pierre Wave - Modules / Light control |
| Manufacturer | QualityLed |
| Manufacturer SKU | QS-Zigbee-S04-2C-L |
| GTIN / EAN | 8606034720277 |
| HS code | 8537109100 |
Overview
The PIERRE Wave 2 Gang Light Module operates on a 100-240V AC 50/60Hz power supply and supports the independent control of two lighting channels. Utilizing the PIERRE Wave protocol it communicates reliably with compatible gateway hubs, ensuring smooth integration into the smart home network. The absence of a neutral wire requirement allows for easier installation, making it ideal for retrofitting older electrical systems.
Each channel offers secure on/off control with overload and thermal protection features, maintaining stability and safety in varying conditions. This module can be seamlessly integrated into the PIERRE Smart home system, enabling remote management and automation of individual lighting circuits. Users can establish energy-efficient schedules and customize lighting scenarios for increased comfort and convenience.
Modules are typically designed to work with both regular (rocker) switches and push buttons.
Key features
AC 100-240V 50/60Hz, dual-channel light control, Max. load: 2CH: 10-100W per channel, no Neutral, remote control, overload and thermal protection.
Technical specifications
| Electrical | |
|---|---|
| Power Supply | 100-240V AC 50-60Hz |
| Frequency | 2.4 GHz-2.484GHZ |
| Max Load | 2X100W for LED |
| Connectivity | |
| Connectivity | Zigbee |
| Physical | |
| Panel Material | ABS+PC material |
| Product Color | White |
| Wiring Requirements | L - Line |
| Features | |
| LED Indicators | Yes |
| Operation Range | 200 m |
| Environmental | |
| Operating Temperature (°C) | -10 ᯈ +40 |
| Operating Temperature | +14°F - +104°F |
| IP Rating | IP20 |
| Safety | |
| Safety Features | Overload protection, Over voltage protection, Short circuit protection, Thermal protection, Electrostatic protection, Surge protection |
| Control | |
| Number of Channels | 2 channels |
Physical & packaging
| Dimensions (L × W × H) | 39 × 19 × 39 mm |
|---|---|
| Weight | 32 g |
| Box dimensions (L × W × H) | 59 × 29 × 50 mm |
| Box weight | 42 g |
User manual
- 1. Product Description
- 2. Product Size
- 3. System requirements
- 4. Installation
- 5. Manual Override
- 6. Wiring Instructions and Diagrams
- 7. App-to-Device Pairing
- 8. FAQ
1. Product Description
- Reset Key
- Indicator Light
- Mounting Clip
2. Product Size
- With Mounting Clip
- W: 50 mm
- H: 46 mm
- D: 22.5 mm
- Without Mounting Clip
- W: 46 mm
- H: 46 mm
- D: 18 mm
3. System requirements
The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.
Required
- PIERRE Wave products: switches, modules, sensors, thermostats and other devices. They connect wirelessly to the gateway.
- Gateway: a PIERRE display and/or gateway. It links all PIERRE Wave devices and handles the communication with the app.
Optional
- Smart PIERRE app: control and monitoring from a smartphone or tablet. Not required for basic operation.
- Router: gives the gateway internet access for remote control.
Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.
What you need
A PIERRE Wave (Zigbee 3.0, 2.4 GHz) gateway: a PIERRE display and/or gateway.
4. Installation
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
5. Manual Override
The switch module terminal reserves the access of manual override function for the end-user to switch on/off.
- Switch on/off for permanent on/off function.
Notes:
- Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory.
- The App control is synchronized with the manual switch.
6. Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow switch module configuration instructions.
Two way double switch
Two way single control
Without switch
| Run | Wires | Cross-section | Cable type | Conductors |
|---|---|---|---|---|
| From electric box to light module | 3 | 1.5 mm² | NYM-J | L, L1, L2 |
| From light module to switches | 3 | 0.75 mm² | NYM-J | COM, S1, S2 |
Two runs. Mains into the module is the line in and the switched lines L1–L2 back out to the fittings, all at 1.5 mm². The wall switches are looped on 0.75 mm²: common and S1–S2. Do not bring a neutral to the module: this variant has no neutral terminal and does not act as a Zigbee repeater.
7. App-to-Device Pairing
Please scan the QR code to download PIERRE application
Log in with your Username and Password
Open Settings and press "Add Wave I/O"
Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing
- Reset Key
- Indicator Light
- PIERRE Wave Gateway
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
8. FAQ
Q1: What should I do if I cannot configure the light module?
- Check that the module is powered.
- Make sure the PIERRE Wave gateway (PIERRE display and/or gateway) is online.
- Check the wiring against the diagram.
Q2: What loads can be connected to this module?
Lighting loads such as ceiling lamps and panel lights, within the rated load given in the specifications.
Q3: What happens if the Wi-Fi or internet goes down?
The module keeps working locally. You can still switch the light with the wall switch and control it from the PIERRE display and/or gateway; only remote access from the app is unavailable.
Q4: How do I reset the module?
Either toggle the connected wall switch 5 times, or press and hold the reset key for about 10 seconds, until the indicator light flashes.
Q5: What happens during a power cut?
The module keeps its last state and comes back when power is restored.
Q6: What size wall box does the module need?
See the Product Size section. The module fits behind the switch in a standard wall box; a deep box makes wiring easier.
Q7: What is the difference between the neutral and no-neutral modules?
Modules with a neutral also act as Zigbee repeaters and strengthen the network. Use the no-neutral module where no neutral is available at the switch.
Q8: Can any switch or button be used?
Yes. Any standard wall switch or push-button can be connected to the S inputs.
Q9: Does it support multi-way switching?
Yes. See the diagrams in the Wiring Instructions and Diagrams section.