RGBCW Led Strip Module
| SKU | PW-MOD-RGBCW-LED |
|---|---|
| Product line | PIERRE Wave |
| Category | Lights / LED Strip control |
| Manufacturer | QualityLed |
| Manufacturer SKU | QS-Zigbee-RGBCW |
| GTIN / EAN | 8606034720338 |
| HS code | 8537109100 |
Overview
The PIERRE Wave RGBCW LED Strip Module operates on a 12-24V DC power input and is capable of controlling RGB (Red, Green, Blue), CCT (Correlated Color Temperature), and CW (Cool White) LED channels independently. Utilizing PIERRE Wave communication, it integrates smoothly with compatible smart home gateways, allowing users to control and customize their LED strips through the PIERRE Smart home system.
This module supports various lighting effects, color transitions, and dimming levels, providing users with flexibility to create dynamic and personalized lighting scenes. Built-in overload and thermal protection enhance the module’s safety and reliability. With integration into the Pierre smart home ecosystem, users can automate lighting schedules, sync lights with other devices, or adjust lighting remotely via the mobile app.
Key features
12-24V DC input, independent RGB, CCT, and CW channel control, Max Load.: 96W(12V), 192W(24V) for LED, remote operation, customizable lighting effects, overload and thermal protection
Technical specifications
| Electrical | |
|---|---|
| Power Supply | DC 12V/24V |
| Current | 8.0 A |
| Connectivity | |
| Connectivity | Zigbee |
| Physical | |
| Panel Material | ABS+PC material |
| Product Color | White |
| Environmental | |
| Operating Temperature (°C) | -20 - +80 |
| Operating Temperature | -4°F ～ +176°F |
| Operating Humidity | ≤ 85 % RH |
| IP Rating | IP20 |
| Safety | |
| Safety Features | Overload protection, Short circuit protection, Reverse polarity protection, Thermal protection, Electrostatic protection |
Pin layout
| Pin | Label | Type | Position |
|---|---|---|---|
| 1 | 12/24V+ | power_12/24V_in | top |
| 2 | GND | power_gnd_in | top |
Physical & packaging
| Dimensions (L × W × H) | 114 × 18 × 45 mm |
|---|---|
| Weight | 50 g |
| Box dimensions (L × W × H) | 118 × 24 × 49 mm |
| Box weight | 60 g |
User manual
- 1. Product Description
- 2. Product Size
- 3. Installation
- 4. Wiring
- 5. System requirements
- 6. App-to-Device Pairing
- 7. FAQ
1. Product Description
- Reset Button
2. Product Size
- W: 114 mm
- H: 45 mm
- D: 18 mm
3. Installation
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
4. Wiring
- Wiring the output for a single-color LED strip installation.
- Wiring the output for a dual-color LED strip installation.
- Wiring the output for an RGB LED strip installation.
- Wiring the output for an RGB+WW/RGB+CW LED strip installation.
- Wiring the output for an RGB+CW+WW LED strip installation.
| Run | Wires | Cross-section | Cable type | Conductors |
|---|---|---|---|---|
| From power supply to module | 2 | 0.75 mm² | H05VV-F 2 × 0.75 | 12/24 V DC +, GND |
| From module to LED strip | 6 | 0.75 mm² | multi-core LED cable (e.g. LiYY 6 × 0.75) | V+ (common), R, G, B, CW, WW |
Two runs. The DC supply into the driver is two conductors at 0.75 mm². The strip side is a six-core low-voltage cable at 0.75 mm² per conductor: V+ common, red, green, blue, cool white and warm white. The common carries the sum of all channel currents, so size it for the total strip load. Long strip runs drop voltage along their length, so feed from both ends or split the run into sections, and leave accessible space for the driver and the power supply.
5. System requirements
The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.
Required
- PIERRE Wave products: switches, modules, sensors, thermostats and other devices. They connect wirelessly to the gateway.
- Gateway: a PIERRE display and/or gateway. It links all PIERRE Wave devices and handles the communication with the app.
Optional
- Smart PIERRE app: control and monitoring from a smartphone or tablet. Not required for basic operation.
- Router: gives the gateway internet access for remote control.
Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.
What you need
A PIERRE Wave (Zigbee 3.0, 2.4 GHz) gateway: a PIERRE display and/or gateway. The 12/24 V DC power supply and the LED strip itself are site-supplied and sized to the run.
6. App-to-Device Pairing
Please scan the QR code to download PIERRE application
Log in with your Username and Password
Open Settings and press "Add Wave I/O"
Press the reset button 5 times until the connected strip flashes quickly.
- Reset button
- PIERRE Wave gateway
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the strip stops flashing, the PIERRE Wave pairing process is finished
7. FAQ
Q1: What should I do if I cannot configure the LED strip module?
- Check that the module is powered.
- Make sure the PIERRE Wave gateway (PIERRE display and/or gateway) is online.
- Check the wiring against the diagram.
Q2: What type of LED strip can be connected?
12/24 V DC constant-voltage strips: single colour, dual white, RGB, RGB+WW or RGB+CW, and RGB+CW+WW.
Q3: What happens if the Wi-Fi or internet goes down?
The strip keeps its last colour and brightness and can still be controlled from the PIERRE display and/or gateway; only remote access from the app is unavailable.
Q4: How do I reset the module?
Press the reset button 5 times or more until the connected strip flashes quickly.
Q5: What happens during a power cut?
The module keeps its last state and comes back when power is restored.
Q6: How often must a long strip be fed?
Feed long strips every 5 m or from both ends to avoid voltage drop, and size the power supply to the total strip load.
Q7: Can PIERRE handle 48 V magnetic recessed LED systems and their dimming?
Not with this module: it drives 12/24 V DC strips. 48 V magnetic track systems are dimmed through their own driver; if the driver has a 0–10 V input, use the PIERRE 0-10V Dimmer Module (PW-MOD-D010-1G-NL).