Search
16 results for “PIERRE Temperature Sensor has:table section:solutions type:page has:video”
Solution - Humidity and Temperature Sensors
…evice. The measured values are transmitted to the PIERRE Controller , where they can be displayed in the PIERRE system and used as conditions for heating, c…
matched in title, tags, body
PIERRE Thermostat T2
The PIERRE Thermostat T2 is a room thermostat designed for pierre-yellow/35 text-pierre-navy rounded px-0.5">temperature control and integration into the PIERRE…
matched in title, tags, body
Solution - PIERRE Wave - AC Split Inverter (IR Remote Control)
…e, so the way to bring a split inverter unit into PIERRE is to put an infrared transmitter in front of it and let the system send the same codes the origina…
matched in title, tags, body
PIERRE Wave - Prepare for Wave installation
…g example for a single-floor apartment built with PIERRE Wave devices. The point of a Wave installation is that only the devices that carry a load need a ca…
matched in title, body
Solution - Hot Tub with Massage Jets
…t tub or hydrotherapy pool is controlled from the PIERRE system through standard outputs and inputs: relays for pumps and valves, switched or dimmed outputs…
matched in tags, body
Solution - Pools
Pool equipment is controlled from the PIERRE system through the same outputs and inputs used elsewhere: relays for pumps and valves, dimmable or…
matched in tags, body
Solution - Sauna
The PIERRE system enables the control and monitoring of compatible sauna systems. The sauna can be turned on a…
matched in tags, body
Solution - Curtains Control
…p Curtains are controlled directly from the Smart PIERRE application: Open Close Stop Position control — move the curtain to any intermediate position Wirin…
matched in body
Solution - Fan/Motor
…ooms. It is wired through a relay and driven by a PIERRE Pro or Lite controller. Wiring The fan is powered from its own circuit; the relay only switches it.…
matched in body
Solution - Gas Boiler
A compatible gas boiler can be controlled by the PIERRE system through its external heat-demand input . The PIERRE system can provide the room pierre-yellow/35 text-pierre-navy rounded px-0.5">temperature …
matched in body
Solution - Heat Recovery Unit (Recuperator)
…ompatible recuperators can be integrated into the PIERRE system . Depending on the available control interface, the unit can be switched on and off, and its…
matched in body
Solution - Heating and Cooling with 0-10V
…nly an analogue control input are driven from the PIERRE Pro Controller with a 0–10 V signal. The voltage on the line sets the output level of the device co…
matched in body
Solution - HVAC with Blower Speed
…ere the fan operates at several fixed speeds. The PIERRE Controller manages the HVAC unit based on the measured room pierre-yellow/35 text-pierre-navy rounded px-0.5">temperature. Each controller output is …
matched in body
Solution - Modbus Integration
… with a Modbus interface connects directly to the PIERRE Pro Controller: heating and cooling units, recuperators, pierre-yellow/35 text-pierre-navy rounded px-0.5">sensors, meters and lights. The controller…
matched in body
Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)
…nd Cooling control uses a switching output of the PIERRE Controller together with a pierre-yellow/35 text-pierre-navy rounded px-0.5">temperature pierre-yellow/35 text-pierre-navy rounded px-0.5">sensor to control heating or cooling demand. The operation i…
matched in body
Solutions - Fan Coil control
The PIERRE system supports fan coil unit (FCU) control through several interface methods, depending on the req…
matched in body