Search
18 results for “lights has:diagram”
Solution - RGB Lights
RGB light control drives an RGB LED strip through a PIERRE RGB controler. The driver takes the red, green and blue channels, and the controller sets t…
matched in title
PIERRE Display - Berlin 10"
… Use I/O - Allow user to open/close doors, switch lights on/off etc in this place. Mange I/O - Allow user to create automation for I/Os, edit I/Os. Manage G…
matched in body
PIERRE Display - Helsinki 6”
… Use I/O - Allow user to open/close doors, switch lights on/off etc in this place. Mange I/O - Allow user to create automation for I/Os, edit I/Os. Manage B…
matched in body
PIERRE Display - Rio 4”
… Use I/O - Allow user to open/close doors, switch lights on/off etc in this place. Manage I/O - Allow user to create automation for I/Os, edit I/Os. Manage …
matched in body
PIERRE Partner - Controller Commissioning
… must be switched separately needs its own cable. Lights on the same circuit can be wired together and controlled by a single switch. All cables — including…
matched in body
Solution - Dimmable Light Control
…10 V Extender limit. The extender is for dimmable lights, fan-coil units, valves, actuators and other 0–10 V controlled devices whose control input has a ma…
matched in body
Solution - Electrical Load Control
…dule, scene or user command. Aquarium equipment — lights, filters or air pumps, where they are suitable for ON/OFF control, following schedules or automatio…
matched in body
Solution - Hot Tub with Massage Jets
…culation Pump 2 2.5 mm² NYM-J L , N From relay to Lights 2 1.5 mm² NYM-O L, N From Mechanical relay to Heat Pump 2 0.75 mm² H07V-K COM, SIGNAL From DS18B20 …
matched in body
Solution - Modbus Integration
… cooling units, recuperators, sensors, meters and lights. The controller reads and writes the device's registers, so it both commands the device and reads b…
matched in body
Solution - ON/OFF Light control
…er than overloading one. One circuit per output . Lights that must always switch together can share a relay; lights that must ever be controlled separately …
matched in body
Solution - PIERRE Controllers
… must be switched separately needs its own cable. Lights on the same circuit can be wired together and controlled by a single switch. All cables — including…
matched in body
Solution - Pools
…rculation pump 2 2.5 mm² NYM-O L, N From relay to Lights 2 1.5 mm² NYM-O L, N From relay to Valve 2 1.5 mm² NYM-O L, N From Mechanical relay to Heat pump 2 …
matched in body
Solution - Sauna
…a Heater 2 2.5 mm² NYM-J L , N 230V From relay to Lights 2 1.5 mm² NYM-O L , N 230V From Buttons to PIERRE input 2 0.75 mm² H07V-K +12V, SIGNAL From Sensor …
matched in body
Solution - Valve Control
…–10 V Extender: suitable for controlling dimmable lights, fan-coil units, valves/actuators, and other 0–10 V controlled devices, provided that the device’s …
matched in body
Solutions - Fan Coil control
…0 V Extender is suitable for controlling dimmable lights, fan-coil units, valves/actuators, and other 0–10 V controlled devices, provided that the device’s …
matched in body
Solution - Rain Sensor
…tem can automatically close motorized windows, skylights, doors, shutters, or awnings when rain is detected. This functionality helps protect the building a…
matched in body
Solution - Humidity and Temperature Sensors
The combined humidity and temperature sensor measures both the temperature and relative humidity of a room with a single device. The measured values a…
matched in body
Solution - Pergola Control
Compatible motorized pergolas can be integrated into the PIERRE system . Depending on the pergola design, the system can control the opening and closi…
matched in body