Search
22 results for “sensor has:steps line:wave line:pro has:video”
Solution - Contact Sensor
A contact sensor reports whether an opening is open or closed — a door, window, gate, garage door or any other monit…
matched in title, tags, path
Solution - Leak Sensor
A leak sensor detects water or excessive moisture at a specific point and reports it to the controller, which can…
matched in title, tags, path
Solution - Rain Sensor
The Rain Sensor can be integrated into the PIERRE system using a dry-contact output or relay-based signal. Any rain…
matched in title, tags, body
Solution - CO and other Gas Sensors
…tion Electrical Scheme for Different Types of Gas Sensors Cables Position Wires Diameter Type Comment From PIERRE to Compatible CO2/Gas sensor 3 0.258 mm² U…
matched in title, tags, path
Solution - Humidity and Temperature Sensors
The combined humidity and temperature sensor measures both the temperature and relative humidity of a room with a single device. The measured va…
matched in title, tags, path
Solution - Smoke and Fire Sensors
…ollow the wiring guidelines of the specific smoke sensor. The sensor is connected to the controller I/O terminals via its own relay contact, so the detectio…
matched in title, tags, path
PIERRE Wave - Prepare for Wave installation
…that are mains powered. Battery-powered devices — sensors, scenario switches, radiator valves — need no cable at all. Gateway PIERRE Wave gateway is require…
matched in body
Smart PIERRE - Pairing Wave Devices
… to Install and Pair the Temperature and Humidity Sensor https://www.youtube.com/embed/sy6ix_zDCwM https://www.youtube.com/embed/PpDC8aTTG2k How to Set Up t…
matched in body
Smart PIERRE - Sirens
…Applications The siren can be linked to different sensor states, system events, scenes, and automations. Examples include: Activating the siren when smoke i…
matched in body
Solution - Dimmable Light Control
…ls at once. From automation: a schedule, a motion sensor, a brightness reading, or a timeout that switches the light off after a set time. The wall buttons,…
matched in body
Solution - Electrical Outlet
… can be included in: Scenes Scheduled automations Sensor-based automations Energy management automations Examples: Turn off all outlets when leaving the bui…
matched in body
Solution - Gas Boiler
…g a PIERRE thermostat or a compatible temperature sensor. Based on the measured temperature and configured target temperature, the system generates the heat…
matched in body
Solution - Gates Control
…oller while the LED is orange. Should the contact sensor report the open or the closed state? Mount the sensor so that it closes when the door or gate is fu…
matched in body
Solution - Modbus Integration
…troller: heating and cooling units, recuperators, sensors, meters and lights. The controller reads and writes the device's registers, so it both commands th…
matched in body
Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)
…the PIERRE Controller together with a temperature sensor to control heating or cooling demand. The operation is similar to a traditional thermostat: the PIE…
matched in body
Solution - ON/OFF Light control
…ts at once. From automation: a schedule, a motion sensor, a brightness reading, or a timeout that switches the light off after a set time. The buttons, the …
matched in body
Solution - Open/Close Door Locks
…ND Access control module – Electric lock and door sensor wiring - Electric schemes full Schemes - Simple lock and door sensor Cables - Simple lock and door …
matched in body
Solution - PIERRE Wave - AC Split Inverter (IR Remote Control)
…ahrenheit display. An optional linked temperature sensor. Without one, the app shows the target as the current temperature, because an infrared link is one-…
matched in body
Solution - Sirens
… devices and events, including motion and contact sensors, smoke, gas and CO detectors, water leakage sensors, access control events, automation rules, and …
matched in body
Fundamental - PIERRE Wave – Setup & Troubleshooting Guide
…supply compatible permanently powered devices and sensors with Zigbee routing functionality Router Devices form the backbone of the Zigbee mesh and must rem…
matched in body
PIERRE Partner - Modbus
…y uses Modbus RTU over RS-485 for HVAC equipment, sensors, thermostats, and other compatible devices. Modbus TCP is used in the PIERRE system for the integr…
matched in body
PIERRE Wave – Wireless System Installation
…rward messages for other devices. Battery-powered sensors are typically end devices. Gateway A PIERRE WAVE gateway is required for the wireless system to co…
matched in body