Search
18 results for “switches has:steps type:page”
PIERRE Display - Berlin 10"
…he Button. Tap in the field Toggle I/O . Toggle - Switches from currently active to opposite state. To confirm your choice tap the button Done . Follow next s…
matched in body
PIERRE Display - Rio 4”
…es the duration after which the I/O automatically switches off once it has been activated by an Automation or another I/O. Modbuses Add a new Modbus interface…
matched in body
PIERRE Partner - Controller Informations
…s connected to the controller, including sensors, switches, and other signal sources. Outputs Configure output channels used for controlling lighting, HVAC eq…
matched in body
PIERRE Partner - Electrical Outlet
…guration. Fields Pin — the controller output that switches the outlet. Timeout — in auto mode, how long the outlet stays switched on after the condition turne…
matched in body
PIERRE Partner - Fan
A Fan is a controller output that switches an on/off fan through a relay. Once configured it can be operated from the Smart PIERRE app and dri…
matched in body
PIERRE Partner - Fan Coil
…he room may drift from the target before the unit switches on. Turn-off hysteresis – default 0 °C. How far past the target the room must go before the unit sw…
matched in body
PIERRE Partner - Heat Recovery Unit (Recuperator)
…controlled from the PIERRE system. The controller switches the unit on and off and selects the fan speed. Configuration To add a recuperator: Open the desired…
matched in body
PIERRE Partner - Irrigation
Irrigation is a controller output that switches a solenoid valve or pump for a watering zone. Once configured it can be operated from the Smart PIE…
matched in body
PIERRE Partner - Lights
A Light is a controller output that switches a lighting circuit through a relay. The fixture itself does not need to be a smart device – any sta…
matched in body
PIERRE Partner - Motion Sensor
… lights on detected movement, with a timeout that switches them off again. Triggering notifications when movement is detected outside expected hours. Use as a…
matched in body
PIERRE Partner - Passive Heating and Cooling
… from a measured room temperature. The controller switches the device on and off around the target temperature set by the user, so it runs only when the room …
matched in body
PIERRE Partner - Push Button
…he Button. Tap in the field Toggle I/O . Toggle - Switches from currently active to opposite state. To confirm your choice tap the button Done . Follow next s…
matched in body
PIERRE Partner - Siren
…Save . Timeout Defines the delay before the Siren switches off after the triggering condition is no longer active. Default value: 1 second. Slide to Confirm W…
matched in body
Smart PIERRE - Fan
…deleting the output. Technical Notes A fan output switches a relay; the fan itself is powered from its own circuit, not from the controller. Multi-speed fans …
matched in body
Smart PIERRE - I/O list
…/Os are grouped by device type — lights, sensors, switches and so on — so a specific device can be located without scrolling the whole system. Search and Filt…
matched in body
Smart PIERRE - IO Sync (Overview)
… the device to the right bridge first. For on/off switches tick Mode only. For dimmers tick Mode and Intensity. Step-by-Step Example: Three Hallway Lights A h…
matched in body
Smart PIERRE - Light Automation
Light automation in the Smart PIERRE app switches lighting from sensors and time conditions instead of manual operation. A light set to Auto follows …
matched in body
Smart PIERRE - Lights
…nfirm enabled, the app asks for a swipe before it switches, to prevent accidental taps. Dimming and Colour Dimmable lights, such as dimmed LED circuits or PWM…
matched in body