Search
14 results for “switches type:page has:steps section:pierre partner application section:pierre partner application”
PIERRE Partner - Controller Informations
…s connected to the controller, including sensors, switches, and other signal sources. Outputs Configure output channels used for controlling lighting, HVAC eq…
matched in title, path, body
PIERRE Partner - Push Button
…he Button. Tap in the field Toggle I/O . Toggle - Switches from currently active to opposite state. To confirm your choice tap the button Done . Follow next s…
matched in title, path, body
PIERRE Partner - Electrical Outlet
…guration. Fields Pin — the controller output that switches the outlet. Timeout — in auto mode, how long the outlet stays switched on after the condition turne…
matched in title, path, body
PIERRE Partner - Heat Recovery Unit (Recuperator)
…controlled from the PIERRE system. The controller switches the unit on and off and selects the fan speed. Configuration To add a recuperator: Open the desired…
matched in title, path, body
PIERRE Partner - Motion Sensor
… lights on detected movement, with a timeout that switches them off again. Triggering notifications when movement is detected outside expected hours. Use as a…
matched in title, path, body
PIERRE Partner - Fan
A Fan is a controller output that switches an on/off fan through a relay. Once configured it can be operated from the Smart PIERRE app and dri…
matched in title, path, body
PIERRE Partner - Fan Coil
…he room may drift from the target before the unit switches on. Turn-off hysteresis – default 0 °C. How far past the target the room must go before the unit sw…
matched in title, path, body
PIERRE Partner - Lights
A Light is a controller output that switches a lighting circuit through a relay. The fixture itself does not need to be a smart device – any sta…
matched in title, path, body
PIERRE Partner - Passive Heating and Cooling
… from a measured room temperature. The controller switches the device on and off around the target temperature set by the user, so it runs only when the room …
matched in title, path, body
PIERRE Partner - Irrigation
Irrigation is a controller output that switches a solenoid valve or pump for a watering zone. Once configured it can be operated from the Smart PIE…
matched in title, path, body
PIERRE Partner - Siren
…Save . Timeout Defines the delay before the Siren switches off after the triggering condition is no longer active. Default value: 1 second. Slide to Confirm W…
matched in title, path, body
Smart PIERRE - IO Sync (Overview)
… the device to the right bridge first. For on/off switches tick Mode only. For dimmers tick Mode and Intensity. Step-by-Step Example: Three Hallway Lights A h…
matched in path, body
Smart PIERRE - I/O list
…/Os are grouped by device type — lights, sensors, switches and so on — so a specific device can be located without scrolling the whole system. Search and Filt…
matched in path, body
Smart PIERRE - Lights
…nfirm enabled, the app asks for a swipe before it switches, to prevent accidental taps. Dimming and Colour Dimmable lights, such as dimmed LED circuits or PWM…
matched in path, body