Search
125 results for “with has:steps has:video”
Fundamental - PIERRE Wave – Setup & Troubleshooting Guide
…IERRE Wave devices can have three different roles within the Zigbee network: Coordinator – Gateway / Display The Coordinator creates and manages the Zigbe…
matched in body
Fundamentals - Software/Firmware Update Procedure for PIERRE Devices
…ys and PIERRE Controllers (Pro and Lite) Partners with extended privileges have access to the Target Build field. This feature allows devices to be update…
matched in body
Intercom Wiring in Condo Buildings
…PIERRE Display for receiving calls, communicating with visitors, and controlling the corresponding entrance. The network infrastructure, power supplies, e…
matched in body
PIERRE Application Versions
…acting technical support. Verifying compatibility with system components. Confirming installation of the latest release. Comparing versions across multipl…
matched in body
PIERRE Display - Berlin 10"
… as a PIERRE Wave gateway, handling communication with the wireless devices: Device pairing. Device control. Mesh network management. Wave device communic…
matched in body
PIERRE Display - Helsinki 6”
… as a PIERRE Wave gateway, handling communication with the wireless devices: Device pairing. Device control. Mesh network management. Wave device communic…
matched in body
PIERRE Display - Rio 4”
… as a PIERRE Wave gateway, handling communication with the wireless devices: Device pairing. Device control. Mesh network management. Wave device communic…
matched in body
PIERRE Partner - 0–10V Controlled Heat Recovery Unit - (DC Recuperator)
…figure compatible heat recovery ventilation units with 0–10 V fan speed control . The PIERRE system controls the ventilation level through an appropriate …
matched in body
PIERRE Partner - Alerts
…c events, device states, or automation conditions within the smart home or building system. Alerts help monitor security events, technical failures, acces…
matched in body
PIERRE Partner - Blinds
…ds, shutters, and similar window covering systems within the PIERRE system. Adding Blinds To add a new blind output: Select the desired Controller. Naviga…
matched in body
PIERRE Partner - Building Management
A Building is the primary logical container within the PIERRE system. All controllers, displays, gateways, devices, inputs, outputs, and automation …
matched in body
PIERRE Partner - Contact Sensor
…ted Triggered whenever the contact state changes, with inverted output logic. Use Change when the input represents a continuous state that should be monit…
matched in body
PIERRE Partner - Controller Commissioning
…via Ethernet or 2.4 GHz Wi-Fi 12 VDC power supply with overvoltage protection Connections INPUT 1–16 – Connect sensors, buttons, and other input devices. …
matched in body
PIERRE Partner - Controller Informations
…ring, and monitoring all PIERRE Wired controllers within a building or project. It provides a centralized overview of controller status, connected devices…
matched in body
PIERRE Partner - Curtain
…e installation, make sure that a compatible motor with the appropriate wiring is installed for use with the PIERRE system ( L1, L2, N, PE ). Description A…
matched in body
PIERRE Partner - Doors Control
… each of these columns and when you are satisfied with your choice tap Save button. Choose Sensor Here is a list of Magnet Contact sensors connected to th…
matched in body
PIERRE Partner - Electrical Outlet
…ing Modes The outlet supports Off, On, Auto, Auto with reset and Timer modes. In auto mode the outlet follows its configured condition, and the Timeout va…
matched in body
PIERRE Partner - Fan
…time after the condition ends, then switches off. With 0 the fan follows the condition exactly: on while the condition is true, off when it becomes false.…
matched in body
PIERRE Partner - Fan Coil
…or in the same building. The form cannot be saved without one. Units with Modbus or a 0–10 V input are added as Modbus devices or as the 0–10 V fan coil t…
matched in body
PIERRE Partner - Generic Modbus
…ventilation power. Used primarily in HVAC systems with adjustable fan or compressor levels. Value Type: Read-only Description: Provides measurement data f…
matched in body
PIERRE Partner - Heat Recovery Unit (Recuperator)
…d Save , the recuperator appears on the dashboard with On , Auto and Off . Fan speed in the app Opening the card shows the Intensity bar. Each level is on…
matched in body
PIERRE Partner - Humidity and Temperature Sensor (SHT30)
…m/embed/tQ7NV7yIezs Implementing a Heating System with an SHT Temperature and Humidity Sensor https://www.youtube.com/embed/0jD7j-VpJIs Implementing Heati…
matched in body
PIERRE Partner - IP Camera Configuration
…e configured, the camera stream will be available within the application. RTSP URL Templates Hikvision Main Stream: rtsp://username:password@IP_ADDRESS:55…
matched in body
PIERRE Partner - Irrigation
…. Automation Applications Watering on a schedule, with the run time set by Timeout. Suspending watering while a Rain Sensor reports rain, and resuming aft…
matched in body
PIERRE Partner - Leakage Sensor
…ggered whenever the leakage sensor state changes, with inverted output logic. NC sensors. Use Change when the input represents a continuous state, such as…
matched in body
PIERRE Partner - Lights
…the light follows the automation rules set on it, with the timeout applied. The rules and the wall buttons run on the controller, so they keep working wit…
matched in body
PIERRE Partner - Modbus
…arameters, the wiring and network topology comply with the requirements of the connected devices and the applicable PIERRE wiring documentation. Typical M…
matched in body
PIERRE Partner - Modbus Transfer Layer
…serial communication over RS485. Used for devices with a two-wire serial port. Modbus TCP/IP — communication over the building network. Used for devices w…
matched in body
PIERRE Partner - Motion Sensor
…nge inverted – Triggered when the signal changes, with the signal state interpreted inversely. The selected Signal determines which change in the Motion S…
matched in body
PIERRE Partner - Passive Heating and Cooling
…ure sensor, a Modbus thermostat, a PIERRE display with a built-in sensor, or a Wave temperature sensor paired to a display of the same building. The outpu…
matched in body
PIERRE Partner - Push Button
…function changes the state of the assigned output with each button press. Example: Current State Button Press New State OFF Press ON ON Press OFF This fun…
matched in body
PIERRE Partner - Rain Sensor
…pplication. The sensor provides the PIERRE system with information about whether rain is detected. Once configured, the Rain Sensor can be used as a trigg…
matched in body
PIERRE Partner - RFID Reader
…/embed/vWkDolUOSXo How to Set Up and Connect RFID with a Doorbell https://www.youtube.com/embed/h8Gl3cDI9gU How to Set Up RFID with Fingerprint for Access…
matched in body
PIERRE Partner - Safety Detectors
…t is designed for integration of 12 VDC detectors with relay outputs. The input can be used for smoke detection, fire alarms, carbon monoxide (CO) detecto…
matched in body
PIERRE Partner - Services
…can notify staff. Modbus TCP Allows communication with third-party devices over the Modbus TCP protocol, across the local network. Compatible devices exch…
matched in body
PIERRE Partner - Siren
…type is used to control indoor and outdoor sirens within the PIERRE system. Sirens can be activated manually, through automations, or by sensor events. Co…
matched in body
PIERRE Partner - Temperature Sensor DS18B20
…the Address should be set to 0. For installations with multiple sensors on the same communication bus, each sensor must be assigned a unique Address value…
matched in body
PIERRE Partner - Valves
… Name – The name of the valve used to identify it within the PIERRE system. Image – An optional icon or image used to represent the valve. Role – Defines …
matched in body
PIERRE Power Supplies - Models
…tems. Powering DIN rail network switches. Systems without directly connected electromagnetic locks. 12 VDC / 2A / 24W For larger installations with severa…
matched in body
PIERRE Wave - Prepare for Wave installation
…wiring example for a single-floor apartment built with PIERRE Wave devices. The point of a Wave installation is that only the devices that carry a load ne…
matched in body
PIERRE Wave – Wireless System Installation
…not be opened. Extending an existing installation with individual devices. Locations that were not planned for during the initial design stage. WAVE Netwo…
matched in body
Room Service
…isturb — so staff can see the state of every room without entering it. What It Covers Cleaning requests raised by the guest. Do Not Disturb status set by …
matched in body
Smart PIERRE - Alarm
…. Alarm Actions Alarm events can also be combined with other PIERRE functions through Automations . Depending on the installed and configured devices, an …
matched in body
Smart PIERRE - Alerts
…c events, device states, or automation conditions within the smart home or building system. Alerts help monitor security events, technical failures, acces…
matched in body
Smart PIERRE - Automations
…d conditions are met, the configured actions run, without anyone operating anything. Simple Automations Most automations are short and set up in a few ste…
matched in body
Smart PIERRE - Blind control
…r than 45%. The Blinds system is fully integrated with the PIERRE smart home platform, providing seamless control and the ability to create custom automat…
matched in body
Smart PIERRE - Blinds and Curtains automations and scenarios
…y. Reduced manual operation. Seamless integration with the PIERRE automation system. Description Automated Scenario - Blinds/Curtains You can create scena…
matched in body
Smart PIERRE - Brightness Sensor
…ness values can be used as conditions or triggers within automation logic. Examples: Lighting Control Turn lights ON when brightness falls below a defined…
matched in body
Smart PIERRE - Curtains
…s users to control and monitor motorized curtains within the PIERRE system. Curtains are available on the Dashboard and in the I/O List of the Smart PIERR…
matched in body
Smart PIERRE - Dimmable Lights
…evel. Status Indication The icon and image change with the current status, so the state of the light is readable at a glance. Automation and Scenarios Dim…
matched in body
Smart PIERRE - Doors Control
…nabled, the door control action must be confirmed with a sliding gesture. This helps prevent accidental unlocking and is particularly recommended for entr…
matched in body
Smart PIERRE - Electrical Outlet Control
…m outside the property. The icon and image change with the current status, so an active outlet is visible at a glance. Automation Outlets can be automated…
matched in body
Smart PIERRE - Fan
…athroom. A fan can be part of a scenario together with other outputs. Long press on the fan opens the Used In tab, which lists every automation and scenar…
matched in body
Smart PIERRE - Fan Coil
…n a gauge, the target temperature, and a fan icon with the current speed. From the card the user can: Turn the unit on or off with the power button. When …
matched in body
Smart PIERRE - Heat Recovery Unit (Recuperator)
…ication or control interface used for integration with the PIERRE system. Dashboard Control The recuperator can be controlled directly from the Dashboard …
matched in body
Smart PIERRE - I/O list
…s and so on — so a specific device can be located without scrolling the whole system. Search and Filter The search bar and the filters narrow the list, wh…
matched in body
Smart PIERRE - IO Sync (Overview)
…be used intentionally (e.g., to create exceptions within a group), but requires careful planning. How syncing behaves Bidirectional: changes can originate…
matched in body
Smart PIERRE - Irrigation
…ped when a rain sensor detects rainfall. Combined with other devices, for example running with the outdoor lighting or starting sprinklers on a motion tri…
matched in body
Smart PIERRE - Irrigation Automation
…tate it had before. Use it for a one-off watering without touching the rules. The Timer tab needs a controller firmware that supports it; the app shows a …
matched in body
Smart PIERRE - Key Sharing
Key sharing gives someone access without them installing the app. The key is sent as a link or a QR code, and it opens in the recipient's…
matched in body
Smart PIERRE - Keys
…te requires a contact sensor on the door or gate. Without it, only the locked state is real — the rest is what was commanded. Review which users hold acce…
matched in body
Smart PIERRE - Kiosk Mode
… panel into a dedicated PIERRE control interface. With it enabled, the device works only as a control panel and the underlying Android system is not reach…
matched in body
Smart PIERRE - Leakage Sensor
…thing acts on it. Where the risk is real, pair it with a motorised valve on the incoming water line. Name each sensor after its position, so an alert iden…
matched in body
Smart PIERRE - Light Automation
…hen it is dark enough. Time conditions – weekdays with a start and end time, or a single switching time. Times are fixed clock times; there is no sunrise …
matched in body
Smart PIERRE - Lights
…t while the light is on and grey while it is off. With Slide to confirm enabled, the app asks for a swipe before it switches, to prevent accidental taps. …
matched in body
Smart PIERRE - Location Restriction
…rol an I/O, the app compares the phone's position with the building location. Inside the radius the command goes through. Outside, a map dialog shows the …
matched in body
Smart PIERRE - Mass Management
…h room individually. It is intended for buildings with a large number of similar rooms, such as hotels and apartment blocks. What It Is For Setting a heat…
matched in body
Smart PIERRE - Motion Sensor
…by-step below walks through it. Alerts – an alert with the sensor as condition, combined with a time condition using And, sends a push notification when m…
matched in body
Smart PIERRE - Open Doors/Gates via Smartphone
…cation Each door and gate shows its current state with a picture — for example Locked–Closed or Unlocked–Closed — so the state is readable before acting. …
matched in body
Smart PIERRE - Pairing Wave Devices
…eway Selection If multiple Gateways are available within the system, select the Gateway that will manage the new Wave device. Device Discovery After selec…
matched in body
Smart PIERRE - Passive Heating and Cooling
…transfer or remove heat through building surfaces without using a fan, such as underfloor, wall, and ceiling heating or cooling. The system can be control…
matched in body
Smart PIERRE - Permission Management
…er time. Tokens - A list of all Tokens associated with the User. Access - A list of the User's role-based access permissions . Tap on the Access tab. Role…
matched in body
Smart PIERRE - Push Button
…e down what each event does at handover; a button with three different functions is not self-explanatory. Avoid assigning a door unlock to Tap on a button…
matched in body
Smart PIERRE - Rain Sensor
…sed to define when an I/O or Automation is active within a specified time period.) Add new Automation for the Irrigation To add the Rain sensor to this Au…
matched in body
Smart PIERRE - Reservation
…lace instead of two. What It Covers Reservations, with guest details and the reservation period. Property services, alongside the bookings. A central over…
matched in body
Smart PIERRE - RGB Lights
…es RGB LED strips to be integrated and controlled within the wired PIERRE PRO system. The LED strip is controlled through a PIERRE PRO RGB Module . The mo…
matched in body
Smart PIERRE - RGBW Lights
…lour and Warmth The colour and the warmth are set with a picker. A long press on the picker allows finer adjustment. An RGBW light has a separate white ch…
matched in body
Smart PIERRE - Roles
…nstaller may require different access permissions within the same property. Use LIMITED TIME access for temporary or scheduled access instead of repeatedl…
matched in body
Smart PIERRE - Safety Detectors
…related sensors connected to the system. It works with compatible 12 VDC detectors that provide a dry contact or relay contact output. Supported Devices S…
matched in body
Smart PIERRE - Scenarios
…matically when its configured conditions are met, without user interaction. Typical triggers: Time schedules. Device states. Sensor values. Presence detec…
matched in body
Smart PIERRE - Shaders
…ntrolled and their current status to be displayed within the PIERRE system. Configured Shaders are available on the Dashboard and in the I/O List of the S…
matched in body
Smart PIERRE - Sirens
… enabled, the user must confirm the manual action with a slide gesture. This helps prevent accidental activation or deactivation of the siren. Used In The…
matched in body
Smart PIERRE - Temperature Sensor
… large, move the sensor rather than correcting it with a large offset. Temperature Format Celsius (°C) Fahrenheit (°F) Used In The Used In tab lists every…
matched in body
Smart PIERRE - User management
…ed, users can access the application and interact with devices, automations, and other functions according to their assigned permissions. Search and User …
matched in body
Smart PIERRE - Valve automations
The Valve Automation feature allows valves within the PIERRE system to be controlled automatically based on sensor inputs, schedules, and automatio…
matched in body
Smart PIERRE - Valves
…ting, cooling, and other valve-controlled systems within the property. Dashboard Control Valves can be opened or closed directly from the Dashboard with a…
matched in body
Solution - Battery Backup
… devices through compatible 12 VDC power supplies with integrated battery charging functionality. During a mains power failure, the power supply automatic…
matched in body
Solution - Blinds Control
…also be set, so light and privacy can be adjusted without closing the blind completely. Control from the App The Smart PIERRE application provides three c…
matched in body
Solution - CO and other Gas Sensors
…Controller , allowing its alarm status to be used within the PIERRE system for status indication, notifications, and triggering automations. The type of g…
matched in body
Solution - Contact Sensor
…ancy-based automation. The status can be combined with schedules, user presence and other sensors to build more specific rules. Technical Notes Check the …
matched in body
Solution - Contactors
…istem - Electric schemes full Schemes - Contactor with Mechanical relay Schemes - Contactor with relay Contactor in PIERRE sistem - Electric schemes full …
matched in body
Solution - Dimmable Light Control
… into the power the luminaire needs. PIERRE works with regular bulbs, LED lamps and LED strips, at 230 V and at low voltage such as 12 V or 24 V. The ligh…
matched in body
Solution - Door Bell Buttons
…oor display and the app. Button Types Push button with dry contact — any momentary push button with a potential-free output can be used. Two wires run fro…
matched in body
Solution - Electrical Load Control
…ories, any electrical device that can be switched with simple ON/OFF logic can be integrated. The PIERRE controller sends a 12V DC control signal to a rel…
matched in body
Solution - Electrical Outlet
…lled directly from the Dashboard and the I/O List within the Smart PIERRE application. Available functions: Turn ON Turn OFF The current state of the outl…
matched in body
Solution - Gas Boiler
…w to Control Floor Heating and an Electric Boiler with HELSINKI https://www.youtube.com/embed/QvAKXlM56Ao FAQ What happens if there is a power outage? If …
matched in body
Solution - Gates Control
…etic contact or a compatible end-position signal. Without physical feedback, the system can know that a command was sent but cannot reliably confirm that …
matched in body
Solution - Humidity and Temperature Sensors
…h the temperature and relative humidity of a room with a single device. The measured values are transmitted to the PIERRE Controller , where they can be d…
matched in body
Solution - Leak Sensor
…thing acts on it. Where the risk is real, pair it with a motorised valve on the incoming water line. Test the sensor at handover with a wet cloth, and con…
matched in body
Solution - Modbus Integration
Overview Any device with a Modbus interface connects directly to the PIERRE Pro Controller: heating and cooling units, recup…
matched in body
Solution - NFC Tag and RFID Card
… method of user identification and access control within the PIERRE system. Compatible Tags and Cards operate at 13.56 MHz and are assigned to a specific …
matched in body
Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)
…witching output of the PIERRE Controller together with a temperature sensor to control heating or cooling demand. The operation is similar to a traditiona…
matched in body
Solution - ON/OFF Light control
…tion. What You Need PIERRE Pro or Lite Controller with one free output per lighting circuit and o position. Relay, one relay per circuit. 12 V DC power su…
matched in body
Solution - Open/Close Door Locks
…. Integration The electric lock can be integrated with the PIERRE Controller through a wired connection. Control can be combined with different access met…
matched in body
Solution - PIERRE Alexa Integration
…oom to warm white". PIERRE scenes can be combined with Alexa routines. Limit The Alexa integration supports up to 300 I/O points , including devices and s…
matched in body
Solution - PIERRE Controllers
…h buttons, switches, and other controlled devices within a PIERRE installation. The Controller Lite can be used for applications such as lighting, shading…
matched in body
Solution - PIERRE Music Integration - SONOS
…ome. Music as part of a morning routine, together with the lighting and the blinds. A different setting in the evening, run from a single scene. Technical…
matched in body
Solution - PIERRE Wave - AC Split Inverter (IR Remote Control)
…oner then appears in the system as its own device with a temperature, a season and a fan speed. Only a display can host the IR Remote The IR Remote must b…
matched in body
Solution - Push Button Control
…als to separate PIERRE Controller inputs. Example with UTP Cable A standard UTP cable contains 8 conductors (4 twisted pairs) . One conductor can carry th…
matched in body
Solution - Rain Sensor
…tion rules and scenarios. Actions can be combined with other conditions, sensors, schedules, or weather-related logic to create advanced automation workfl…
matched in body
Solution - RGB Lights
…nted out of sight. Description Schemes RGB module with amplifier full Cables Position Wires Diameter Type Comment New From PIERRE to RGB modul 3 0,75 mm² …
matched in body
Solution - Secure Door Locks (motorized)
…ontrol and monitor compatible electric door locks within the PIERRE system. Motorized locks can be operated manually, remotely, or through automations. Ty…
matched in body
Solution - Sirens
… enabled, the user must confirm the manual action with a slide gesture. This helps prevent accidental activation or deactivation of the siren. Used In The…
matched in body
Solution - Smoke and Fire Sensors
…uits in the building. Combined responses together with alarms and other system functions. Important Notice The PIERRE system is a building automation and …
matched in body
Solution - Valve Control
… where increased electrical safety or integration with building automation systems is required. High-Voltage Valves High-voltage valves are typically powe…
matched in body
Tokens - Add Licence Plate Number
…ehicle access control using compatible IP cameras with License Plate Recognition (LPR/ANPR) . A registered plate acts as a credential, in the same way as …
matched in body
Tokens - Add RFID card or RFID tag
…ards provide secure and convenient access control within the PIERRE system. RFID credentials are managed through the Smart PIERRE application and can be a…
matched in body
PIERRE Partner - Brightness Sensor
…ness values can be used as conditions or triggers within automation logic. Examples: Lighting Control Turn lights ON when brightness falls below a defined…
matched in body
PIERRE Partner - Profile
…name and profile picture. Password — changed from within the profile settings. Language — the app interface language, useful when working across regions o…
matched in body
Smart PIERRE - Activity Log
… detailed and comprehensive record of all actions within the system over a specified period. To access the Activity log, users can navigate to the designa…
matched in body
Smart PIERRE - Cameras
… settings. Rename the camera. Change its position within the list. Modify available camera settings. The Cameras section provides quick access to live vid…
matched in body
Smart PIERRE - Clock
… dashboard element that displays the current time within the PIERRE application. Key Features Adding a Clock A Clock can be added from the I/O list in the…
matched in body
Smart PIERRE - Display Comissioning
…nt A Display can be assigned to only one Building within the PIERRE system. User Interface Settings The visibility of the following interface elements can…
matched in body
Smart PIERRE - Magnet Contact Sensor
…uilt on it behaves backwards. Keep the magnet gap within specification; on a door that settles over time the gap grows and the sensor starts reporting ope…
matched in body
User Profile Settings
…ecurity, users can change their password directly within the application. It is recommended to use a strong and unique password to protect access to the s…
matched in body