Smart PIERRE - Doors Control
Description
The Doors function is used to control and display the status of doors and gates integrated into the PIERRE system through the Smart PIERRE application.
Configured doors are available:
-
on the Dashboard,
-
in the I/O List,
-
and in the Keys menu.
From these interfaces, users can control the doors and gates they are authorized to access.
Control
A door can be controlled directly from its corresponding card.
Depending on the system configuration, available functions may include:
-
unlocking the electric lock,
-
controlling the door or gate,
-
displaying the current status.
The door icon and image may change according to the available status information.
Doors and gates available to the user can also be controlled from the Keys menu.
Settings
Press and hold the Door card to access additional settings.
The following sections are available:
-
Edit
-
Automation
-
Used In
Edit
The Edit section allows the available door settings to be modified:
-
Name – Name of the door.
-
Open Position Photo – Image displayed for the open state.
-
Closed Position Photo – Image displayed for the closed state.
-
Slide to Confirm – Enables confirmation by a sliding gesture.
-
Timeout – Defines how long the unlock command remains active before the system returns the control to its default state.
Slide to Confirm
When Slide to Confirm is enabled, the door control action must be confirmed with a sliding gesture.
This helps prevent accidental unlocking and is particularly recommended for entrance doors, gates, and doors leading outside.
Timeout
The Timeout value should be configured according to the operation of the electric lock and the door.
The value should provide sufficient time for access while preventing the unlock command from remaining active longer than necessary.
Automation
The Automation section allows custom automations related to the door to be created.
For example:
-
unlocking the door when a valid RFID or other authorized credential is recognized,
-
time-based lock control,
-
triggering additional automations based on an access event.
The available automation options depend on the door configuration and other devices integrated into the PIERRE system.
Used In
The Used In section displays all Scenes and Automations in which the selected door is used.
Door Status
To display the actual physical Open / Closed state of the door, appropriate feedback, such as a door contact sensor, is required.
Without such feedback, the PIERRE system may know the issued control command or the control state of the lock, but this alone does not confirm whether the door is physically open or closed.
Technical Notes
-
Slide to Confirm is recommended for entrance doors, gates, and doors leading outside to help prevent accidental unlock commands.
-
The Timeout value should be configured according to the actual operating requirements of the specific lock and door.
-
A suitable door contact sensor is required for reliable feedback of the physical Open / Closed state.
-
For escape routes, fire-rated doors, or other safety-related doors, applicable fire, building, and safety requirements take priority over PIERRE automation functions.
-
Smart PIERRE door control must not replace or bypass any required mechanical release, emergency release, escape, or fire-safety function of the door.
Control of the Doors
Doors control is quick and simple, managed directly from the Keys menu.
You can also control them from the Dashboard.
Follow the example of the Front door.
Locked, Unlocked, Closed, Open
Doors can be:
- Locked
- Unlocked
If Magnet sensor is added to the Doors, Doors can be:
- Open
- Closed
GOOD TO KNOW:
For sliding Doors, when they are in the Open Direction position, their status is Open.
Locked - Close
In order to change status of the Doors from the Unlocked - Open to Locked - Close tap on the card of the desired Doors and status will be changed.
Icon of the Doors and picture will be changed according to status Locked - Close.
Unlocked - Open
In order to change status of the Doors from the Locked - Closed to Unlocked - Open to tap on the card of the desired Doors and status will be changed.
Icon of the Doors and picture will be changed according to the new status Unlocked - Open.
Open I/O list - Doors
To edit the Doors's settings, follow next steps.
Edit Doors
Edit following form:
- Name - Edit name of the Doors.
- Change picture - Choose the source of the picture for each status of the Doors.
- Slide to confirm - When it is enabled you will be asked to confirm the desired operation to avoid accidental actions.
- Timeout - It shows for how long the Doors will be Open in auto mode.
Tap Submit/Done.
Follow next steps for more details.
GOOD TO KNOW:
Doors can be edited by long-press the Doors' card on the Dashboard or tapping them in the I/O list.
Change a photo - Doors
You have four options:
- Open Library - The phone’s Library will open. It is recommended to take pictures from the same angle for both Doors statuses to achieve a complete and consistent view.
- Open Camera - You can take a picture using your smartphone. For a complete and consistent view, it’s recommended to capture both Doors' statuses from the same angle.
- Choose default image - These images are prepared in advance in order to provide a complete and seamless experience.
- Remove image - Removes existing image.
Timeout - Doors
Choose Timeout - scroll through columns for the Hours, Minutes, Seconds.
Tap Save button.
Slide to confirm - Doors
Slide to confirm feature adds an extra layer of security, preventing accidental actions.
It asks you to confirm your choice once more.
If you want Doors to Lock tap on the card of the Doors. Tap button Slide to Lock and slide from the left to the right side.
Used In - Doors
The Used In tab shows all the scenarios and automations where the Doors are applied, making it easy to see where this I/O is used without the need to search manually. If it isn't used in any, the list will be empty, and a message will display: "This I/O is not in use anywhere." This feature is particularly useful as it consolidates all relevant information in one place.
Keys
The Door automatically unlocks every day from Monday to Sunday between 6:00 PM and 3:00 AM, allowing convenient access during these hours. Outside this time range, the Door will remain locked, enhancing security while ensuring accessibility during preferred hours. This automation is ideal for settings like a shared entryway or community space, enabling controlled access aligned with user preferences.
+Add new Automation - Doors
Tap on the tab Automation and then tap on the +Add new Automation.
In this case, Front door will be automated to be unlocked every day from 6 o'clock to 3 o' clock.
Add new item - Doors
There is possibility to add:
- New Time condition,
- New Delay
- Existing I/O.
Tap the New Time condition.
New Time Condition
You should set Days, Start time and End time in this step.
Tap in the field of each of them to set them.
For more details follow next steps.
Select Days - Door
Select Days when the Doors will be active by clicking on the checkbox/checkboxes next to the days from the list.
In this case select all days from Monday to Sunday.
Tap the button Done.
Start Time and End Time
Start time and End time fields will show you clock and icon of the keyboard in order to set these two parameters.
In this case set start time at 6 o'clock and end time to 3 o'clock.
Tap the button OK. In case that you want to cancel it click on the button Cancel.
(Time conditions are used in auto mode or triggering I/Os activation/deactivation in a set time frame. It can be added as a part of the scenario or I/O in to Auto mode condition section.)
Confirm automation settings - Doors
Confirm automation settings, tap button Done.
