Flat Series 1 Gang Light Switch - Black (L+N) (PW-SWI-L-1G-LN-BLK-F)

SKU	PW-SWI-L-1G-LN-BLK-F
Product line	PIERRE Wave
Category	Wall Switches / Flat Series
Manufacturer	Keeper
Manufacturer SKU	TY-ZL-UN-L1
GTIN / EAN	8606034720710
HS code	8536508000

Overview

The PIERRE Wave - Flat Series 1 Gang Light Switch (L+N) controls one independent lighting circuit from the plate and from the PIERRE system.

It runs from 100-240 V AC 50/60 Hz with both Live and Neutral required at the back box, is rated 10 A, and switches ≤800 W.

It communicates over PIERRE Wave (Zigbee 3.0, 2.4 GHz), and being mains powered it also routes for battery devices nearby. Standby consumption is 0.3 W.

The front is tempered glass in black, 86 x 86 mm and 35 mm deep, mounting to a 80x80 mm box with 60 mm fixing centres. Rated IP20 for dry indoor locations, operating from 0 °C to +40 °C.

Key features

Single-channel lighting switch
≤800 W, rated 10 A
100-240 V AC 50/60 Hz, Live and Neutral required
PIERRE Wave (Zigbee 3.0, 2.4 GHz)
Tempered glass front, black

Technical specifications

Certification
CE Marking	Yes
RoHS Compliant	Yes
Warranty	2 years
Control
Number of Channels	1 channel
Electrical
Power Supply	100-240V AC 50-60Hz
Power Consumption	0.3 W
Current	10.0 A
Max Load	≤800W
Environmental
Operating Temperature	+32°F - +104°F
Operating Temperature (°C)	0 - +40
Operating Humidity	≤ 80 % RH
IP Rating	IP20
Features
LED Indicators	Yes
Physical
Width	86 mm
Height	86 mm
Depth	35 mm
Weight	137 g
Panel Material	Tempered glass
Product Color	Black
Mounting Type	Wall mount
Mounting Box	80x80mm
Bolt Hole Distance	60 mm
Wiring Requirements	N - Neutral, L - Live
Connectivity
Connectivity	Zigbee

Physical & packaging

Dimensions (L × W × H)	86 × 34 × 86 mm
Weight	219 g
Box dimensions (L × W × H)	105 × 49 × 105 mm
Box weight	250 g

User manual

Open in the manual viewer ↗

1. System requirements
2. Wiring
3. App-to-Device Pairing
4. Video

1. System requirements

The PIERRE Wave (Zigbee 3.0, 2.4 GHz) system consists of the following components.

Required

PIERRE Wave products: switches, modules, sensors, thermostats and other devices. They connect wirelessly to the gateway.
Gateway: a PIERRE display and/or gateway. It links all PIERRE Wave devices and handles the communication with the app.

Optional

Smart PIERRE app: control and monitoring from a smartphone or tablet. Not required for basic operation.
Router: gives the gateway internet access for remote control.

Operation: the gateway connects to the router by Wi-Fi or LAN. PIERRE Wave products communicate wirelessly with the gateway in both directions: commands are sent and status updates are received through the Smart PIERRE app.

What you need

A PIERRE Wave (Zigbee 3.0, 2.4 GHz) gateway: a PIERRE display and/or gateway.

2. Wiring

1 Gang Light Switch Wiring (L+N)

Run	Wires	Cross-section	Cable type	Conductors
From Electric box to Light switch	2	1.5 mm²	NYM-O	L, N
From Light switch to lamp	1	1 mm²	NYM-O	L1 (switched line; the neutral to each lamp is wired directly from the electric box)

3. App-to-Device Pairing

Scan the QR code to download the Smart PIERRE app.

Log in with your Username and Password

Open Settings and press "Add Wave I/O"

Put the switch into pairing mode: press and hold the Reset Key for 10 seconds (use a small, thin object such as a paperclip) until the indicator light starts flashing.

Press "Find Devices".

The app shows the list of available devices. Press "Add found devices".

Enter Name, Role and Group and press Save.

When the indicator light stops flashing, the pairing process is finished.

4. Video

How to install and configure a PIERRE Wave light switch (the video shows the two-gang model; the steps are the same for the 1 gang model). https://www.youtube.com/watch?v=zXz-0DQyTSo

Flat Series 1 Gang Light Switch - Black (L+N)