On this page
Product specifications
Measurements
Measurements (box)
Specifications
The PIERRE Wave 2 Gang Dimmer Module operates on a 220-240V AC 50/60Hz input and is capable of controlling up to two independent lighting circuits. It utilizes PIERRE Wave communication to connect with a compatible gateway hub, providing stable and responsive lighting control. The absence of a neutral wire requirement allows it to be easily installed behind existing wall switch boxes, making it suitable for retrofit projects in older buildings.
Each channel supports a maximum dimmable load, providing efficient dimming capabilities for connected LED lamps. Built-in overload protection and heat management ensure reliable operation in various environmental conditions. The module is compatible with leading and trailing-edge dimming types, making it versatile for different lighting setups.
With integration into the PIERRE Smart home system, users can remotely control and monitor their lighting circuits, set schedules, and include the dimmer in automation scenarios for enhanced convenience.
User manual for 2 Gang Dimmer Module (no Neutral)
- Reset Key
- Indicator Light
- Mounting Clip
- Without Mounting Clip
- W: 46 mm
- H: 46 mm
- D: 18 mm
- With Mounting Clip
- W: 50 mm
- H: 46 mm
- D: 22,5 mm
Voltage
220-240 AC 50/60Hz
Max. Load
2X100 W for LED
Operation frequency
2.4-2.484GHz
Operation temp.
-10ºC - +40ºC
Protocol
Zigbee 3.0
Operation range
≤ 200 m
Dims (WxHxD):
46x46x18 mm
IP rating
IP20
Dimming type
Trailing Edge
Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water , damp or hot environments.
- Install the device away from strong signal sources such as microwave ovens that may cause signal interruption resulting in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
The switch Dimmer terminal reserves the access of manual override function for the end-user to switch on/off, or adjust the light level by push-switch.
- Short Push (<1s): permanent on/off function.
- Long Push (>1s): adjust the brightness level.
Notes:
- Both the adjustment on App and the push switch can overwrite each other, the last adjustment remains in memory.
- App control is synchronized with the manual switch.
- The “S” terminals may be left unconnected if no manual control is required.
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow dimmer module configuration instructions.
- Without Switch
- With One Switch
- With Two Switches
The PIERRE Wave system is a user-friendly solution for integrating and managing smart devices through a central platform. The system consists of the following components:
A - Required Elements:
- PIERRE Wave Products: These smart devices, including lighting, thermostats, sensors, and other appliances, connect wirelessly to the PIERRE Wave Gateway. They provide essential functions and capabilities for the system.
- PIERRE Wave Gateway: The central unit linking all PIERRE Wave devices, the gateway manages communication and data exchange, ensuring security and stability. It supports remote access and control, with the default Berlin display interface, though users can choose any PIERRE display model.
B - Optional Elements:
- Mobile PIERRE App: This app allows users to manage and monitor the system from their smartphone or tablet, offering real-time updates and remote access. It provides convenience but is not necessary for basic system operation.
- Router: An optional component that enables internet connectivity, allowing devices to be accessed and controlled remotely.
- System Operation: The gateway can connect to the router via Wi-Fi or LAN for internet connectivity, enhancing remote management capabilities. PIERRE Wave products communicate wirelessly with the gateway, which acts as the central hub. This bidirectional communication allows data to flow both ways, enabling users to send commands and receive status updates through the Mobile PIERRE App. The app facilitates effective management and real-time feedback on device statuses.
Please scan the QR code to download PIERRE application
Please scan the QR code to download PIERRE application
Open Settings and press "Add Wave I/O"
Press and hold the Reset Key for 10 seconds (use a small, thin object like a paperclip) until the Indicator Light starts flashing
- Reset Key
- Indicator Light
- PIERRE Wave Gateway
Press "Find Devices"
PIERRE application will show the list of available devices. Press "Add found devices"
Enter Name, Role and Group settings and Save it
When the Light indicator stops flashing, the PIERRE Wave pairing process is finished
Q1: What should I do if I can’t configure the dimmer module?
- Please check whether the device is powered on.
- Make sure the PIERRE Wave Gateway is available.
- Make sure the wiring is correct.
Q2: What device can be connected to this PIERRE dimmer module?
It can be connected to devices such as triac led light, incandescent lamp or halogen lamp.
Q3: What happens if the WIFI goes off?
You can still control the device connected to the switch module with your traditional switch and with PIERRE displays.
Q4: How do I reset the device?
- Press down the reset key for about 10 seconds until the indicator light flashes quickly for pairing.
- Turn off the traditional button switch (the one connected to the PIERRE dimmer module). Then press and hold for about 10 seconds until the indicator light flashes quickly for pairing.
