On this page
We strongly recommend the PIERRE Rain sensor for its optimal integration within the PIERRE smart home system. These sensors are designed to detect rainfall and provide real-time data, allowing the system to trigger automated actions. They work by using a pair of electrodes that sense when rainwater creates a connection, transmitting this signal to the PIERRE controller via a 12V input. Installed outdoors, these sensors require proper wiring to ensure seamless connectivity with the system. Once set up, they continuously monitor for rainfall, sending alerts or triggering specific actions when rain is detected.
- Compatible rain sensors: The PIERRE system also supports various compatible rain sensors, which offer similar functionality and can be easily integrated into the system. These sensors can be configured in the PIERRE Partner application and incorporated into automation scenarios such as retracting awnings or pausing irrigation systems during rain to prevent water wastage. This integration allows for real-time control of your home environment based on weather conditions, enhancing both convenience and efficiency.
- Automation possibilities: The functionality of compatible rain sensors extends beyond simply detecting rainfall. They enable automation scenarios that take specific actions during rainfall, such as protecting outdoor furniture or stopping irrigation systems to conserve water. By providing real-time data to the PIERRE system, these sensors ensure your home responds intelligently to changing weather, improving both comfort and energy management.
- Environmental and energy benefits: The benefits of integrating compatible rain sensors into the PIERRE smart home system are considerable. They automate tasks that would otherwise require manual intervention, contributing to energy savings by reducing unnecessary water usage. By responding automatically to weather conditions, these sensors offer a smart, eco-friendly solution, improving both the functionality of the home and its environmental impact. Their seamless integration makes them an invaluable asset for managing environmental factors with ease.
| Position | Wires | Diameter | Type | Comment |
|---|---|---|---|---|
| From Rain sensor to PIERRE | 2 | cat.5 | UTP | +12V, INPUT |
What color mean what on Controller LED?
Green – Online:
The controller is online and connected to the network, functioning as expected.
Red – Offline:
The controller is offline, indicating a disconnection from the network or that there is no internet access.
Light Blue – AP Mode:
The controller is in Access Point (AP) Mode, meaning it is broadcasting its own network, allowing devices to connect directly to the controller for setup or configuration.
Dark Blue – AP Mode with Pierre Partner:
The controller is in AP Mode, and it is actively being managed through the Pierre Partner system. This mode is used for more advanced setup or partner-level configuration.
Purple – Searching for IP Address:
The controller is attempting to obtain an IP address from the router or network. It is searching for an internet connection.
Orange – Firmware Update:
The controller is in the process of downloading a firmware update, ensuring that the system stays up-to-date with the latest software and features.
These LED color indicators provide essential information about the controller’s current status, making it easy to monitor its connection, operation mode, and maintenance activities.
Has it been added to configuration?
If not: Add it in the PIERRE Partner application.
Also, check if it's specified within the push button which lamp you want to control.
Have you tried activating and deactivating the Rain Sensor again?
If not: Give it a try. If the sensor has been newly added, it needs a state change.
Is the Rain Sensor properly connected to the 12V and one of PIERRE's inputs?
If not: Connect it correctly according to the diagram.
To exclude the aforementioned possibilities, touch a piece of wire to connect the 12V to the PIERRE's input where the Rain Sensor is connected. If in application the dot turned green then everything is fine until that point, and it could be either the Rain Sensor or the wire that is broken somewhere.
In which cases should Input and Output be added to the same Controller?
If one Input has influence on the Output they both should be added to the same Controller.
For example in situation when one Motion sensor triggers a Lamp they should be add to the same Controller for best performances.
How should the sensors be wired?
Each sensor (motion, light, contact, etc.) should be individually wired to the PIERRE control cabinet in a star pattern.