Search

Solution - Gate, Garage Door, Parking Ramp Control

…turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable.

matched in tags, body

Solution - Push Button Control

…ysical wall controls. Standard latching or toggle switches are not used for direct PIERRE PRO input control. When the push button is pressed, it sends the 12 …

matched in tags, body

Electric Blind motor AM45 20/17- PREORDER

…er shutters, blinds and awnings. Mechanical limit switches, IP44, and a lift capacity of 80 kg.

Flood sensor

…IERRE Pro Flood Sensor detects standing water and switches an NPN normally-open output. 5-24 V DC, IP67, for floor or low wall mounting in plant rooms, bathro…

Mechanical Relay with Socket (13A 230V AC / 230V AC coil)

…al Relay with Socket (13A 230V AC / 230V AC coil) switches a 230 V load from a 230 V AC control signal. DIN-rail socket, for use where the controlling signal …

Mechanical Relay with Socket (16A 250V AC / 12V DC coil)

The Mechanical Relay with Socket switches a 250 V AC load from a 12 V DC controller output. DIN-rail socket, the standard interposing relay b…

Slim Mechanical Relay with Socket (6A 230V AC / 12 V DC coil)

…cal Relay with Socket (6A 230V AC / 12 V DC coil) switches a 230 V load from a 12 V DC controller output. Slim 41F socket, DIN-rail mounted, bridgeable with t…

Solid State Relay with Socket (2A, 24–264V AC / 9-26V DC coil)

The Solid State Relay with Socket switches a 24–264 V AC load from a 9–26 V DC control signal, with no moving contacts. Rated 2 A and supplied…

SOS Button

10G SFP+ DAC cable

…copper assembly for 10 Gigabit SFP+ links between switches, routers and servers in a PIERRE network cabinet.

SFP+ DAC cable

…copper assembly for 10 Gigabit SFP+ links between switches, routers and servers in a PIERRE network cabinet.

1 Gang Light Module (L+N)

…cally designed to work with both regular (rocker) switches and push buttons.

1 Gang Light Module (no Neutral)

…cally designed to work with both regular (rocker) switches and push buttons.

2 Gang Light Module (L+N)

…cally designed to work with both regular (rocker) switches and push buttons.

2 Gang Light Module (no Neutral)

…cally designed to work with both regular (rocker) switches and push buttons.

3 Gang Light Module (L+N)

…cally designed to work with both regular (rocker) switches and push buttons.

Digital Hive Office

…through intuitive displays instead of traditional switches. The entire office space is mobile-controlled, allowing users to manage everything from lighting to…

matched in body

Electric Curtain motor AM68 1.5/100 - PREORDER

…ng remote control via PIERRE Mobile Apps and wall switches. Safety features include obstacle detection, which stops motion upon encountering resistance, prote…

Flat Series 1 Gang Blind/Curtain Switch - Black (L+N)

…ol from the PIERRE app, a schedule or a scene. It switches AC motors up to 200 W and is rated 10 A. It runs from 100-240 V AC 50/60 Hz with both Live and Neut…

Flat Series 1 Gang High Consumer Switch - Black (L+N)

… circulation pumps and air-conditioning spurs. It switches up to 20 A. It runs from 100-240 V AC 50/60 Hz and requires both Live and Neutral at the back box. …

Flat Series 1 Gang Light Switch - Black (L+N)

…tral required at the back box, is rated 10 A, and switches ≤800 W. It communicates over PIERRE Wave (Zigbee 3.0, 2.4 GHz), and being mains powered it also rou…

Flat Series 2 Gang Blind/Curtain Switch - Black (L+N)

…e PIERRE app, a schedule or a scene. Each channel switches AC motors up to 200 W and is rated 10 A. It runs from 100-240 V AC 50/60 Hz with both Live and Neut…

Flat Series 2 Gang Light Switch - Black (L+N)

…tral required at the back box, is rated 10 A, and switches ≤800 W per gang. It communicates over PIERRE Wave (Zigbee 3.0, 2.4 GHz), and being mains powered it…

Flat Series 3 Gang Light Switch - Black (L+N)

…tral required at the back box, is rated 10 A, and switches ≤800 W per gang. It communicates over PIERRE Wave (Zigbee 3.0, 2.4 GHz), and being mains powered it…

Fundamental - PIERRE Wave – Setup & Troubleshooting Guide

…l Router Devices include: PIERRE Smart Plugs wall switches or relay modules with permanent L + N power supply compatible permanently powered devices and senso…

matched in body

Fundamentals - PIERRE Building Structures and System Setups

…d) Room-level devices connect to this switch Room switches connect to floor-level switches Floor switches connect to the main router / core network Hierarchy:…

matched in body

Fundamentals - PIERRE Offline Control

…vailable, the system detects the interruption and switches to local operation, so control from inside the building continues. What Keeps Working and What Does…

matched in body

Fundamentals - PIERRE Pro System (Wired Installation)

…kets and other electrical loads, push buttons and switches, temperature, humidity, and other sensors, door and window contact sensors, water leak detection an…

matched in body

Fundamentals - Smart Ready Installation

…play. Another may want lighting control and smart switches. A third may require heating and cooling control, blinds, sensors, access control or a complete sma…

matched in body

Intercom Wiring in Condo Buildings

… should be used. Cable lengths, network topology, switches and distribution points must comply with the applicable network and PIERRE design requirements. Pow…

matched in body

One-Bedroom Apartment Wiring Examples

…, including any circuit that will be dimmed. Wall switches and buttons. Blind and curtain motors. Heating and cooling actuators, and the room temperature sens…

matched in body

PIERRE Display - Berlin 10"

…he Button. Tap in the field Toggle I/O . Toggle - Switches from currently active to opposite state. To confirm your choice tap the button Done . Follow next s…

matched in body

PIERRE Display - Rio 4”

…es the duration after which the I/O automatically switches off once it has been activated by an Automation or another I/O. Modbuses Add a new Modbus interface…

matched in body

PIERRE Partner - Controller Informations

…s connected to the controller, including sensors, switches, and other signal sources. Outputs Configure output channels used for controlling lighting, HVAC eq…

matched in body

PIERRE Partner - Electrical Outlet

…guration. Fields Pin — the controller output that switches the outlet. Timeout — in auto mode, how long the outlet stays switched on after the condition turne…

matched in body

PIERRE Partner - Fan

A Fan is a controller output that switches an on/off fan through a relay. Once configured it can be operated from the Smart PIERRE app and dri…

matched in body

PIERRE Partner - Fan Coil

…he room may drift from the target before the unit switches on. Turn-off hysteresis – default 0 °C. How far past the target the room must go before the unit sw…

matched in body

PIERRE Partner - Heat Recovery Unit (Recuperator)

…controlled from the PIERRE system. The controller switches the unit on and off and selects the fan speed. Configuration To add a recuperator: Open the desired…

matched in body

PIERRE Partner - Irrigation

Irrigation is a controller output that switches a solenoid valve or pump for a watering zone. Once configured it can be operated from the Smart PIE…

matched in body

PIERRE Partner - Lights

A Light is a controller output that switches a lighting circuit through a relay. The fixture itself does not need to be a smart device – any sta…

matched in body

PIERRE Partner - Motion Sensor

… lights on detected movement, with a timeout that switches them off again. Triggering notifications when movement is detected outside expected hours. Use as a…

matched in body

PIERRE Partner - Passive Heating and Cooling

… from a measured room temperature. The controller switches the device on and off around the target temperature set by the user, so it runs only when the room …

matched in body

PIERRE Partner - Push Button

…he Button. Tap in the field Toggle I/O . Toggle - Switches from currently active to opposite state. To confirm your choice tap the button Done . Follow next s…

matched in body

PIERRE Partner - Siren

…Save . Timeout Defines the delay before the Siren switches off after the triggering condition is no longer active. Default value: 1 second. Slide to Confirm W…

matched in body

PIERRE Power Supplies - Models

…sic smart home systems. Powering DIN rail network switches. Systems without directly connected electromagnetic locks. 12 VDC / 2A / 24W For larger installatio…

matched in body

PIERRE Thermostat T2

…tat performs the local temperature regulation and switches the connected compatible valve actuator or control input through its own output. This allows the th…

matched in body

PIERRE Wave - Prepare for Wave installation

…dules — wired to the motor and to the mains. Wall switches and dimmers — mains connected at the switch position, with the conductors the model requires. Heati…

matched in body

PIERRE Wave – Wireless System Installation

…nd extend the mesh network. Examples include wall switches, dimmers, relay modules, and blind modules. When planning the installation, distribute routers thro…

matched in body

Smart PIERRE - Fan

…deleting the output. Technical Notes A fan output switches a relay; the fan itself is powered from its own circuit, not from the controller. Multi-speed fans …

matched in body

Smart PIERRE - I/O list

…/Os are grouped by device type — lights, sensors, switches and so on — so a specific device can be located without scrolling the whole system. Search and Filt…

matched in body

Smart PIERRE - IO Sync (Overview)

… the device to the right bridge first. For on/off switches tick Mode only. For dimmers tick Mode and Intensity. Step-by-Step Example: Three Hallway Lights A h…

matched in body

Smart PIERRE - Light Automation

Light automation in the Smart PIERRE app switches lighting from sensors and time conditions instead of manual operation. A light set to Auto follows …

matched in body

Smart PIERRE - Lights

…nfirm enabled, the app asks for a swipe before it switches, to prevent accidental taps. Dimming and Colour Dimmable lights, such as dimmed LED circuits or PWM…

matched in body

Solution - Battery Backup

…ins power failure, the power supply automatically switches to battery operation, ensuring uninterrupted power delivery to connected devices. Applications Batt…

matched in body

Solution - Contact Sensor

…t turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable. When should an…

matched in body

Solution - Contactors

… a 12 V DC control signal to the relay. The relay switches the voltage required by the contactor coil – for example, 230 V AC – while the contactor switches t…

matched in body

Solution - Dimmable Light Control

…n sensor, a brightness reading, or a timeout that switches the light off after a set time. The wall buttons, the automations and the timeouts run inside the c…

matched in body

Solution - Electrical Load Control

…a relay or contactor, and that relay or contactor switches the power supply or the control circuit of the connected device. The Integration Rule If the device…

matched in body

Solution - Electrical Outlet

…tivity Timeout The Timeout function automatically switches the outlet off after a predefined period. This can be used for devices that should only operate for…

matched in body

Solution - Fan/Motor

…n is powered from its own circuit; the relay only switches it. One relay output per fan for a single-speed unit. A multi-speed fan needs one output per speed,…

matched in body

Solution - Gas Boiler

… two ways: • Potential-free contacts: one contact switches winter/summer mode, another starts and stops the heat pump. • Modbus RTU: consult the manufacturer …

matched in body

Solution - Humidity and Temperature Sensors

…gers an output — for example a motion sensor that switches a lamp — add both to the same controller. This gives the fastest response. The sensor comes with a …

matched in body

Solution - HVAC with Blower Speed

… two ways: • Potential-free contacts: one contact switches winter/summer mode, another starts and stops the heat pump. • Modbus RTU: consult the manufacturer …

matched in body

Solution - Irrigation Valve Wiring

…. They need a 24 V AC transformer; the controller switches them through a relay output.

matched in body

Solution - Leak Sensor

…t turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable. When should an…

matched in body

Solution - Modbus Integration

…it carries Direction Value Active On / off state. Switches lights and alarms; reports the state of door / window, tamper and presence inputs; for heating and …

matched in body

Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)

…rature with the configured target temperature and switches the corresponding heating or cooling output on or off according to demand. Operating Principle The …

matched in body

Solution - ON/OFF Light control

…n sensor, a brightness reading, or a timeout that switches the light off after a set time. The buttons, the automations and the timeouts run inside the contro…

matched in body

Solution - PIERRE Controllers

…onnect and control various sensors, push buttons, switches, and other controlled devices within a PIERRE installation. The Controller Lite can be used for app…

matched in body

Solution - PIERRE Wave - AC Split Inverter (IR Remote Control)

…nted out of sight of the unit will never work. It switches on and off, but temperature or fan speed do nothing. Why? That is the signature of the wrong model.…

matched in body

Solution - Rain Sensor

…t turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable. When should an…

matched in body

Solution - Sirens

…on has switched it on; when it runs out the siren switches off by itself, even if the alarm condition is still active. The Smart PIERRE app proposes 600 s (10…

matched in body

Solution - Smoke and Fire Sensors

…gers an output — for example a motion sensor that switches a lamp — add both to the same controller. This gives the fastest response. Are the smoke sensors ce…

matched in body

Solutions - Fan Coil control

… two ways: • Potential-free contacts: one contact switches winter/summer mode, another starts and stops the heat pump. • Modbus RTU: consult the manufacturer …

matched in body

Una Casa

…ontrol of blinds via both the app and traditional switches offers flexibility, allowing for easy adjustments based on personal preferences. Climate control is…

matched in body