Search
75 results for “switches,” · 54 pages, 21 products
Solution - Gate, Garage Door, Parking Ramp Control
The PIERRE system controls gates, garage doors, barriers and ramps by emulating the button press their own motor controller expects. This works either…
matched in tags, body
Solution - Push Button Control
The PIERRE PRO system uses momentary push buttons as physical wall controls. Standard latching or toggle switches are not used for direct PIERRE PRO i…
matched in tags, body
Electric Blind motor AM45 20/17- PREORDER
…er shutters, blinds and awnings. Mechanical limit switches, IP44, and a lift capacity of 80 kg.
10G SFP+ DAC cable
…copper assembly for 10 Gigabit SFP+ links between switches, routers and servers in a PIERRE network cabinet.
SFP+ DAC cable
…copper assembly for 10 Gigabit SFP+ links between switches, routers and servers in a PIERRE network cabinet.
Flood sensor
The PIERRE Pro Flood Sensor detects standing water and switches an NPN normally-open output. 5-24 V DC, IP67, for floor or low wall mounting in plant …
Mechanical Relay with Socket (13A 230V AC / 230V AC coil)
The Mechanical Relay with Socket (13A 230V AC / 230V AC coil) switches a 230 V load from a 230 V AC control signal. DIN-rail socket, for use where the…
Mechanical Relay with Socket (16A 250V AC / 12V DC coil)
The Mechanical Relay with Socket switches a 250 V AC load from a 12 V DC controller output. DIN-rail socket, the standard interposing relay behind a P…
Slim Mechanical Relay with Socket (6A 230V AC / 12 V DC coil)
The Slim Mechanical Relay with Socket (6A 230V AC / 12 V DC coil) switches a 230 V load from a 12 V DC controller output. Slim 41F socket, DIN-rail mo…
Solid State Relay with Socket (2A, 24–264V AC / 9-26V DC coil)
The Solid State Relay with Socket switches a 24–264 V AC load from a 9–26 V DC control signal, with no moving contacts. Rated 2 A and supplied with a …
SOS Button
Fundamentals - PIERRE Pro System (Wired Installation)
…kets and other electrical loads, push buttons and switches, temperature, humidity, and other sensors, door and window contact sensors, water leak detection and…
matched in body
Intercom Wiring in Condo Buildings
… the central cabinet may contain: router, network switches, PIERRE Controllers, power supplies, access-control equipment, backup power equipment where required…
matched in body
PIERRE Partner - Controller Informations
…s connected to the controller, including sensors, switches, and other signal sources. Outputs Configure output channels used for controlling lighting, HVAC equ…
matched in body
PIERRE Wave - Prepare for Wave installation
…ered. Battery-powered devices — sensors, scenario switches, radiator valves — need no cable at all. Gateway PIERRE Wave gateway is required; without it the wir…
matched in body
PIERRE Wave – Wireless System Installation
…nd extend the mesh network. Examples include wall switches, dimmers, relay modules, and blind modules. When planning the installation, distribute routers throu…
matched in body
Smart PIERRE - IO Sync (Overview)
…ree Hallway Lights A hallway has three Wave light switches, Hallway 1, Hallway 2 and Hallway 3, all paired to the same PIERRE Display. The customer wants any s…
matched in body
Smart PIERRE - Lights
…nfirm enabled, the app asks for a swipe before it switches, to prevent accidental taps. Dimming and Colour Dimmable lights, such as dimmed LED circuits or PWM-…
matched in body
Solution - PIERRE Controllers
…onnect and control various sensors, push buttons, switches, and other controlled devices within a PIERRE installation. The Controller Lite can be used for appl…
matched in body
1 Gang Light Module (L+N)
The PIERRE Wave 1 Gang Light Module (L+N) is a compact single-channel light control module designed for smart home integration. It requires both Line …
1 Gang Light Module (no Neutral)
The PIERRE Wave 1 Gang Light Module (No Neutral) is a single-channel lighting control module designed for smart home automation. It provides on/off co…
2 Gang Light Module (L+N)
The PIERRE Wave 2 Gang Light Module (L+N) is a dual-channel light control module designed for smart home applications. It requires both Line (L) and N…
2 Gang Light Module (no Neutral)
The PIERRE Wave 2 Gang Light Module (No Neutral) is a dual-channel lighting control module designed for smart home systems. It provides independent co…
3 Gang Light Module (L+N)
The PIERRE Wave 3 Gang Light Module (L+N) is a versatile three-channel lighting control module designed for smart home automation. It requires both Li…
Digital Hive Office
Description Digital Hive is a fully automated building , where every aspect of the environment is controlled through intuitive displays instead of tra…
matched in body
Electric Curtain motor AM68 1.5/100 - PREORDER
The A-OK AM68 1.5/100 is a quiet and compact electric curtain motor delivering 1.5 Nm of torque and 16 cm/s running speed. It is suitable for integrat…
Flat Series 1 Gang Blind/Curtain Switch - Black (L+N)
The PIERRE Wave - Flat Series 1 Gang Blind/Curtain Switch drives one motorised blind or curtain, giving open, close and stop from the plate and from t…
Flat Series 1 Gang High Consumer Switch - Black (L+N)
The PIERRE Wave - Flat Series 1 Gang High Consumer Switch is a single-channel wall switch for high-current circuits — water heaters, ovens, pumps and …
Flat Series 1 Gang Light Switch - Black (L+N)
The PIERRE Wave - Flat Series 1 Gang Light Switch (L+N) controls one lighting circuit from one plate. Black tempered glass, requires Live and Neutral.
Flat Series 2 Gang Blind/Curtain Switch - Black (L+N)
The PIERRE Wave - Flat Series 2 Gang Blind/Curtain Switch drives two motorised blinds or curtains, giving open, close and stop from the plate and from…
Flat Series 2 Gang Light Switch - Black (L+N)
The PIERRE Wave - Flat Series 2 Gang Light Switch (L+N) controls two lighting circuits from one plate. Black tempered glass, requires Live and Neutral…
Flat Series 3 Gang Light Switch - Black (L+N)
The PIERRE Wave - Flat Series 3 Gang Light Switch (L+N) controls three lighting circuits from one plate. Black tempered glass, requires Live and Neutr…
Fundamental - PIERRE Wave – Setup & Troubleshooting Guide
PIERRE Wave – Installation and Network Planning Description PIERRE Wave is the wireless part of the PIERRE Smart Home Solution and uses Zigbee mesh co…
matched in body
Fundamentals - PIERRE Building Structures and System Setups
A reliable system starts with a well-designed structure and proper configuration from the very beginning. To successfully design, commission, and main…
matched in body
Fundamentals - PIERRE Offline Control
PIERRE Offline Control keeps the key functions of the building available when the internet connection is not. Instead of depending only on cloud commu…
matched in body
Fundamentals - Smart Ready Installation
Smart Ready Smart Ready is a future-ready infrastructure concept that makes smart living available from day one, while allowing each home to grow over…
matched in body
One-Bedroom Apartment Wiring Examples
This page shows the recommended wiring for a one-bedroom apartment built on the PIERRE Pro wired system. Everything controlled is wired back to the ap…
matched in body
PIERRE Display - Berlin 10"
The PIERRE Room Control Display Berlin 10" is a wall-mounted unit that combines four roles in one device: room control panel, PIERRE Wave gateway, loc…
matched in body
PIERRE Display - Rio 4”
The PIERRE Room Control Display Rio 4" is a wall-mounted unit that combines four roles in one device: room control panel, PIERRE Wave gateway, local s…
matched in body
PIERRE Partner - Electrical Outlet
Electrical outlets are switched power outputs driven by a controller output. An outlet added in the PIERRE Partner app becomes available to the end us…
matched in body
PIERRE Partner - Fan
A Fan is a controller output that switches an on/off fan through a relay. Once configured it can be operated from the Smart PIERRE app and driven by s…
matched in body
PIERRE Partner - Fan Coil
A Fan Coil is a controller output that drives a fan coil unit through relays: one output opens the valve or enables the unit, and one further output p…
matched in body
PIERRE Partner - Heat Recovery Unit (Recuperator)
A Recuperator is a heat recovery ventilation unit controlled from the PIERRE system. The controller switches the unit on and off and selects the fan s…
matched in body
PIERRE Partner - Irrigation
Irrigation is a controller output that switches a solenoid valve or pump for a watering zone. Once configured it can be operated from the Smart PIERRE…
matched in body
PIERRE Partner - Lights
A Light is a controller output that switches a lighting circuit through a relay. The fixture itself does not need to be a smart device – any standard …
matched in body
PIERRE Partner - Motion Sensor
The Motion Sensor is a wired input that reports movement in a space. The state is available to automation, notifications and alarm functions in the PI…
matched in body
PIERRE Partner - Passive Heating and Cooling
Passive Heating and Cooling controls an on/off heating or cooling device from a measured room temperature. The controller switches the device on and o…
matched in body
PIERRE Partner - Push Button
The Push Button input allows connection of external dry-contact push buttons to a PIERRE controller. Each configured button can trigger one or more ac…
matched in body
PIERRE Partner - Siren
The Siren output type is used to control indoor and outdoor sirens within the PIERRE system. Sirens can be activated manually, through automations, or…
matched in body
PIERRE Power Supplies - Models
PIERRE power supplies provide stable DC power for controllers, network equipment and other devices in the installation. All models are designed for DI…
matched in body
PIERRE Thermostat T2
The PIERRE Thermostat T2 is a room thermostat designed for temperature control and integration into the PIERRE Smart Home Solution . The thermostat is…
matched in body
Smart PIERRE - Fan
Fans are ventilation outputs controlled from the Smart PIERRE app. They appear on the Dashboard and in the I/O list, and can be switched manually or l…
matched in body
Smart PIERRE - I/O list
The I/O section in the Settings of the Smart PIERRE app lists every input and output device in the system, grouped by type. Organised List I/Os are gr…
matched in body
Smart PIERRE - Light Automation
Light automation in the Smart PIERRE app switches lighting from sensors and time conditions instead of manual operation. A light set to Auto follows t…
matched in body
Solution - Battery Backup
The PIERRE system supports battery backup operation for critical devices through compatible 12 VDC power supplies with integrated battery charging fun…
matched in body
Solution - Contact Sensor
A contact sensor reports whether an opening is open or closed — a door, window, gate, garage door or any other monitored opening. The system supports …
matched in body
Solution - Contactors
Contactor Control Description The PIERRE system can control contactors through a Solid State Relay (SSR) or a suitable mechanical relay. The PIERRE Co…
matched in body
Solution - Dimmable Light Control
PIERRE Pro dims lighting over hardwired circuits. The controller sets the brightness on one of its configurable I/O pins, and a dimmer, driver or adap…
matched in body
Solution - Electrical Load Control
Beyond the predefined solution categories, any electrical device that can be switched with simple ON/OFF logic can be integrated. The PIERRE controlle…
matched in body
Solution - Electrical Outlet
The Electrical Outlet I/O type allows users to control connected electrical devices through the PIERRE system. Electrical outlets can be controlled ma…
matched in body
Solution - Fan/Motor
A fan or motor output is used for room ventilation — exchanging air with the outside, or moving air between rooms. It is wired through a relay and dri…
matched in body
Solution - Gas Boiler
A compatible gas boiler can be controlled by the PIERRE system through its external heat-demand input . The PIERRE system can provide the room tempera…
matched in body
Solution - Humidity and Temperature Sensors
The combined humidity and temperature sensor measures both the temperature and relative humidity of a room with a single device. The measured values a…
matched in body
Solution - HVAC with Blower Speed
HVAC with Blower Speed Control HVAC with blower speed control covers heating, ventilation and air conditioning units where the fan operates at several…
matched in body
Solution - Irrigation Valve Wiring
Irrigation valves are the switched outputs of an irrigation system. They are driven through a solid state relay (SSR) board connected to a PIERRE Pro …
matched in body
Solution - Leak Sensor
A leak sensor detects water or excessive moisture at a specific point and reports it to the controller, which can raise a notification and trigger a s…
matched in body
Solution - Modbus Integration
Overview Any device with a Modbus interface connects directly to the PIERRE Pro Controller: heating and cooling units, recuperators, sensors, meters a…
matched in body
Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)
On/Off Heating and Cooling control uses a switching output of the PIERRE Controller together with a temperature sensor to control heating or cooling d…
matched in body
Solution - ON/OFF Light control
PIERRE Pro controls lighting over hardwired circuits. Each switched group runs on its own cable to a relay in the distribution board, driven by a cont…
matched in body
Solution - PIERRE Wave - AC Split Inverter (IR Remote Control)
Description An air conditioner is not wired into the installation. It listens to an infrared remote, so the way to bring a split inverter unit into PI…
matched in body
Solution - Rain Sensor
The Rain Sensor can be integrated into the PIERRE system using a dry-contact output or relay-based signal. Any rain sensor that provides a compatible …
matched in body
Solution - Sirens
Description The Siren I/O type allows sirens connected to the PIERRE system to be controlled and their status to be displayed. Both indoor and outdoor…
matched in body
Solution - Smoke and Fire Sensors
Connection Follow the wiring guidelines of the specific smoke sensor. The sensor is connected to the controller I/O terminals via its own relay contac…
matched in body
Solutions - Fan Coil control
The PIERRE system supports fan coil unit (FCU) control through several interface methods, depending on the requirements of the HVAC equipment. 1. Rela…
matched in body
Una Casa
Description Una Casa in Subotica, a modern residential development that leverages the PIERRE smart system to offer residents a superior living experie…
matched in body