The PIERRE Room Control Display Helsinki 6" is a sleek and modern touch-screen control panel designed to manage various aspects of a room’s environment in the PIERRE smart home system.
- Touch-Screen Control Panel: 6-inch high-resolution LED-backlit display offers an intuitive and user-friendly interface for adjusting room settings such as lighting, temperature, blinds, and more.
- Contemporary Design: Wall-mounted and blends seamlessly into any modern interior, providing both functionality and aesthetic appeal.
- Built-In Sensors: Brightness Sensor: Controls lighting levels or triggers blinds to lower based on sunlight intensity. Temperature Sensor: Manages heating or cooling systems to maintain comfortable temperatures. Humidity Sensor: A humidity sensor measures the amount of moisture in the air. It helps control ventilation systems to maintain good air quality and optimal environmental conditions.
- Unique Knob Control Interface: Provides a tactile way to adjust specific devices like heating or cooling systems, complementing the touch-screen interface for centralized control of multiple smart home devices.
- Integrated Output Relays and Connectivity: Two Output Relays: Each capable of handling 200W per circuit for direct connection to devices like floor heating, lights or water valves.
- Connectivity: Supports wireless network, LAN cable connections, communicates using the Wave/Zigbee protocol for wireless IOs connection.
- Wave device: It communicates and connects with other smart home devices wirelessly.
- Display that also serves as a Pierre Wave Gateway. It enables connectivity and control of Pierre Wave devices within the smart home ecosystem.
- Cabling:
- Minimum requirements for cabling from the electrical box to the display: 2 x 1.5 mm² PP/Y for Live (L) and Neutral (N).
- Preferred setup from the electrical box to the display: 5 x 1.5 mm² PP/Y.
- We recommend this wiring setup because it allows the relay connection for the displays to be managed with a single wire. The two relay outputs of the displays are set up to also allow control of the desired devices directly from the electrical distribution box.
| Position | Wires | Diameter | Type | Comment |
|---|---|---|---|---|
| From Electric box to Display | 2 | 1.5 mm² | PP/Y | L, N |
Can the knob control anything other than heating?
The knob on the Helsinki display currently controls heating, but future updates will allow it to control other functions, such as lighting dimming.
Can the display’s sound be adjusted?
Yes, the display sound can be adjusted. Swipe down from the top of the display to access the menu, where you can find sound settings.
Do displays need to be connected to a controller?
Displays connect to the system through the network, either wired or wireless, and do not require a direct connection to the Controller.
Can the display size be upgraded?
Yes, you can easily replace a smaller display with a larger one, as the system supports such upgrades.
Are the displays waterproof?
No, the displays are not waterproof and are not suitable for installation in areas exposed to moisture or rain.
Is a thermostat required?
No, a classic thermostat is not necessary. Instead, a temperature sensor integrated with the PIERRE system can monitor the room’s temperature and manage the heating/cooling devices accordingly.
Does Pierre have its own thermostat?
Yes, PIERRE offers its own smart thermostats, which can be found in the thermostat product category.
Can a display work as a thermostat?
Yes, most Pierre displays have built-in temperature sensors and can control heating/cooling systems just like a thermostat. All displays have relays that can send signals to heating/cooling devices to turn them on or off.
If I remove an old thermostat, can I replace it with a PIERRE display for heating control?
Yes, you can replace an old thermostat with a PIERRE display, as long as the display includes a temperature sensor for temperature monitoring.
Can the display relay control underfloor heating valves?
Yes, the display can control underfloor heating valves as well as other heating and cooling systems.
How accurate is the temperature sensor?
PIERRE's temperature sensors are highly accurate, with both wired and wireless versions available.
How many temperature sensors do I need?
You need at least one sensor for basic heating/cooling control. It’s practical to install sensors in each heating/cooling zone or room where you want individual temperature control.
What is required for connecting displays?
To operate displays, they need a power connection (2x1.5 mm² – phase and neutral) and internet access through a UTP cable.
How can heat quantity measurement be solved with the PIERRE system?
To measure heat quantity, a PIERRE Pro Controller and an Intesis Mbus to Modbus converter are required. The heat meters are connected in series to the PIERRE Controller.
Can I adjust different temperatures in different rooms?
Yes, you can control the temperature room by room.
Can the Helsinki display work as a thermostat?
Yes, the Helsinki display does have a built-in temperature sensor and can manage the heating or cooling devices by controlling the power circuit.