Search

Network 10 Port Switch (DIN)

The PIERRE Pro 10 Port Switch DIN is a robust industrial Ethernet switch with 8x 100M RJ45 ports, 1x Gigabit uplink, and 1x SFP p…

Network 5 Port Switch

The PIERRE Pro Network 5 Port Switch supports 1000Mbps data transfer with 5 gigabit Ethernet ports, delivering high-speed, uninterrupted…

Network 5 Port Switch (DIN)

The PIERRE Pro Network 5 Port Switch (DIN) is a high-performance, industrial-grade switch that supports 10/100Mbps speeds, PoE functiona…

Network 8 Port Switch

The PIERRE Pro 8 Port Gigabit Switch offers expanded connectivity compared to the 5-port model, featuring 8 gigabit Ethernet ports and s…

MikroTik Cloud Router Switch CRS326 - 24G - 2S + RM

PoE-Powered 8-Port Gigabit Ethernet Switch max 120W

MikroTik Cloud Router Switch CRS317-1G-16S+RM

Solution - Push Button Control

…ysical wall controls. Standard latching or toggle switches are not used for direct PIERRE PRO input control. When the push button is pressed, it sends the 1…

matched in tags, body

Solution - Gate, Garage Door, Parking Ramp Control

…turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable.

matched in tags, body

10G SFP+ DAC cable

…copper assembly for 10 Gigabit SFP+ links between switches, routers and servers in a PIERRE network cabinet.

Magnetic sensor embedded for windows

…C contact type Detection Technology Magnetic reed switch

SFP+ DAC cable

…copper assembly for 10 Gigabit SFP+ links between switches, routers and servers in a PIERRE network cabinet.

Smart Control Panel - Berlin 10"

…anel with a 10.1-inch 1920 × 1200 display and two switched 200 W relay circuits. It communicates via Ethernet or Wi-Fi, also serves as a gateway for PIERRE …

Smart Control Panel - Helsinki 6"

…ch panel with a 6-inch 720 × 1440 display and two switched 200 W relay circuits. It communicates via Ethernet or Wi-Fi, also serves as a gateway for PIERRE …

Solid State Relay with Socket (2A, 24–264V AC / 9-26V DC coil)

The Solid State Relay with Socket switches a 24–264 V AC load from a 9–26 V DC control signal, with no moving contacts. Rated 2 A and suppli…

Flood sensor

…IERRE Pro Flood Sensor detects standing water and switches an NPN normally-open output. 5-24 V DC, IP67, for floor or low wall mounting in plant rooms, bath…

Presence Sensor 360 (Flush Mount)

…slight motion and breathing, so lighting does not switch off on someone reading, working at a desk or sitting in a meeting. It gives 360° coverage with a 4 …

Smart Control Panel - Rio 4"

…s rated 200 W each are built in, so the panel can switch the room’s own lighting rather than only issuing commands to other devices. The Modbus port allows …

Solution - Blinds Control

…her direction button is pressed again on the wall switch while the blind is moving; the Stop button is pressed in the Smart PIERRE application. Wiring The b…

matched in body

Solution - CO and other Gas Sensors

…ntroller • GND – GND from the PIERRE controller • Switch K1 – to INPUT 12–24 V • Switch K2 – to a digital input of the PIERRE controller

matched in body

Solution - Contact Sensor

…t turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable. When should …

matched in body

Solution - Contactors

… a 12 V DC control signal to the relay. The relay switches the voltage required by the contactor coil – for example, 230 V AC – while the contactor switches…

matched in body

Solution - Curtains Control

…me system? Bypass the controller: with the supply switched off, disconnect the motor's UP wire (L1) or DOWN wire (L2) from the relay output and connect it d…

matched in body

Solution - Dimmable Light Control

…each on its own configurable I/O. On/off circuits switched through a relay are covered in the On/Off Light Control lesson. RGB and RGBW strips are a separat…

matched in body

Solution - Door Bell Buttons

…e event can also trigger a scenario — for example switching on the entrance light or a chime output. Steps in the PIERRE Partner app Add the push button to …

matched in body

Solution - Electrical Load Control

…ion categories, any electrical device that can be switched with simple ON/OFF logic can be integrated. The PIERRE controller sends a 12V DC control signal t…

matched in body

Solution - Electrical Outlet

…tivity Timeout The Timeout function automatically switches the outlet off after a predefined period. This can be used for devices that should only operate f…

matched in body

Solution - Gates Control

…d as a conventional wall-mounted push button, key switch, or other external control device. The gate operator remains responsible for controlling the motor,…

matched in body

Solution - HVAC with Blower Speed

…ols a specific HVAC function, such as unit ON/OFF switching or selecting the required blower speed. The Controller determines the required operating state a…

matched in body

Solution - IP Camera Integration

…te to Setup → Camera → Video . Disable H.265 Auto Switch . Set the encoding format to H.264 for each camera channel. Save the configuration. RTSP Port Confi…

matched in body

Solution - Leak Sensor

…osing a motorised water valve on the main supply. Switching off a connected appliance circuit. Technical Notes Place the probe at the lowest point where wat…

matched in body

Solution - Modbus Integration

…it carries Direction Value Active On / off state. Switches lights and alarms; reports the state of door / window, tamper and presence inputs; for heating an…

matched in body

Solution - ON/OFF Light control

…o controls lighting over hardwired circuits. Each switched group runs on its own cable to a relay in the distribution board, driven by a controller output. …

matched in body

Solution - Rain Sensor

…t turns green in the app (or the connected output switches), the controller and the input are fine and the fault is in the device or its cable. When should …

matched in body

Solution - Smoke and Fire Sensors

…pants are alerted. Activation of external sirens. Switching off electrical circuits in the building. Combined responses together with alarms and other syste…

matched in body

Solution - Water Heater

…em, it is essential to use a relay, contactor, or switching device that is correctly rated for the electrical characteristics of the heater. For larger inst…

matched in body

Fundamentals - PIERRE Pro System (Wired Installation)

…arily based on a centralized wiring architecture. Switched loads, lighting circuits, motorized shading devices, and other controlled equipment are typically…

matched in body

PIERRE T2 - Dry Contact Thermostat (110-230V AC, Black)

…s, so the thermostat closes a circuit rather than switching a supply of its own. It runs from 100-230 V AC 50/60 Hz at 1.5 W and provides two dry-contact ch…

PIERRE T2 - Dry Contact Thermostat (110-230V AC, White)

…s, so the thermostat closes a circuit rather than switching a supply of its own. It runs from 100-230 V AC 50/60 Hz at 1.5 W and provides two dry-contact ch…

PIERRE T2 - Dry Contact Thermostat (24V, Black)

…s, so the thermostat closes a circuit rather than switching a supply of its own. It runs from 24 V AC 50/60 Hz at 1.5 W and provides two dry-contact channel…

PIERRE T2 - Dry Contact Thermostat (24V, White)

…s, so the thermostat closes a circuit rather than switching a supply of its own. It runs from 24 V AC 50/60 Hz at 1.5 W and provides two dry-contact channel…

Relay Board 4ch

…o Relay Board 4ch is designed to provide reliable switching for smart home automation. It features four relay channels, each supporting a maximum load of 2.…

Relay Board 8ch

The PIERRE Pro Relay Board 8ch allows efficient switching of multiple high-power devices such as lights, motors, and appliances. Each relay channel suppor…

Solution - Battery Backup

…ins power failure, the power supply automatically switches to battery operation, ensuring uninterrupted power delivery to connected devices. Applications Ba…

matched in body

Solution - Fan/Motor

…n is powered from its own circuit; the relay only switches it. One relay output per fan for a single-speed unit. A multi-speed fan needs one output per spee…

matched in body

Solution - Gas Boiler

…ulation pump of the floor (or of the building) is switched on by automation whenever any manifold valve on that floor is open, and off again when all valves…

matched in body

Solution - Heat Recovery Unit (Recuperator)

… the available control interface, the unit can be switched on and off, and its ventilation intensity or fan speed can also be controlled. Control Recuperato…

matched in body

Solution - Hot Tub with Massage Jets

… outputs and inputs: relays for pumps and valves, switched or dimmed outputs for lighting, and a temperature sensor in the water circuit. What Can Be Contro…

matched in body

Solution - Humidity and Temperature Sensors

…gers an output — for example a motion sensor that switches a lamp — add both to the same controller. This gives the fastest response. The sensor comes with …

matched in body

Solution - ON/OFF HVAC - Passive Heating Cooling (heating pumps)

On/Off Heating and Cooling control uses a switching output of the PIERRE Controller together with a temperature sensor to control heating or cooling…

matched in body

Solution - Open/Close Door Locks

… require a suitable intermediate relay or another switching device rated for the connected load. Where backup operation is required, the power requirements …

matched in body

Solution - Pergola Control

…he pergola's own control unit instead of directly switching the motor. Many pergola systems include their own end-limit control, motor protection, overload …

matched in body

Solution - PID Regulated HC

…erature regulation and can reduce frequent system switching between ON and OFF states. Difference Between PID and ON/OFF Control ON/OFF Control With ON/OFF …

matched in body

Solution - Pools

…sewhere: relays for pumps and valves, dimmable or switched outputs for lighting, and temperature sensors for the water. What Can Be Controlled Water circula…

matched in body

Solution - Sauna

…una heater is a high-power electrical load. Power switching must be implemented through a properly rated contactor and a suitably protected electrical circu…

matched in body

Solution - Sirens

…the siren stays on after the alarm automation has switched it on; when it runs out the siren switches off by itself, even if the alarm condition is still ac…

matched in body

Solutions - Fan Coil control

…ulation pump of the floor (or of the building) is switched on by automation whenever any manifold valve on that floor is open, and off again when all valves…

matched in body